{"title":"SPL Lab sound level meters","description":"\u003ch2\u003eBuy SPL Lab Measurement Microphones \u0026amp; SPL Measuring Devices Cheap Online at Masori\u003c\/h2\u003e\n\u003cp\u003eThose looking for precise acoustic measurement in cars, car audio, or professional studio applications will find a first-class solution in SPL Lab measurement microphones and SPL measuring devices. Whether you want to optimize the sound pressure inside your BMW, analyze the frequency response in a VW Golf, or measure the subsonic levels in a Mercedes: with the versatile product lines from SPL Lab, you cover numerous areas of application. At Masori, your car audio online shop for car sound optimizations, you can buy SPL Lab products online and integrate them directly into various vehicle models.\u003c\/p\u003e\n\u003ch3\u003eExtensive applications for true car audio enthusiasts\u003c\/h3\u003e\n\u003cp\u003eThe modern SPL Lab measuring devices score points with accurate sound pressure measurement, wide measurement range coverage, and intuitive operating concepts. Typical models ensure detection of volume levels between 20 dB and 155 dB. For low-frequency sounds, such as those found in powerful car hi-fi subwoofers, SPL Lab microphones offer sensitivity starting at 20 Hz. Especially for professionals in the field of competitions or sound optimization in cars, there are numerous advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh sensitivity at low frequencies (also below 25 Hz)\u003c\/li\u003e\n\u003cli\u003eRobust housing for installation in harsher environments\u003c\/li\u003e\n\u003cli\u003eCompatibility with common recording devices thanks to 200 Ohm output impedance\u003c\/li\u003e\n\u003cli\u003eVariety of A, C, or Z weightings for precise adjustment to measurement purposes\u003c\/li\u003e\n\u003cli\u003eMeasurement range up to 155 dB, ideal for SPL competitions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you want to track the sound pressure in the trunk of an Opel Corsa or perform a precise frequency response analysis in an Audi A4 – SPL Lab devices ensure reliable signal capture, which is essential for car audio enthusiasts.\u003c\/p\u003e\n\u003ch3\u003ePractical installation and professional fitting service\u003c\/h3\u003e\n\u003cp\u003eThanks to the plug-and-play design, most SPL Lab measurement microphones and SPL measuring devices can be quickly integrated into existing car audio setups. The included mounts allow for fixed installation on the headliner, dashboard, or vehicle doors to accurately record sound paths. If you prefer a professional installation, Masori offers an installation service in Frankfurt Oder:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/masprori.com\/pages\/einbauservice\"\u003eInstallation service Frankfurt Oder\u003c\/a\u003e – for professional installation and precise calibration.\u003c\/li\u003e\n\u003cli\u003eCalibration according to manufacturer specifications to ensure that the measurement microphone and SPL device can be read accurately.\u003c\/li\u003e\n\u003cli\u003eCompatibility check for Audi, VW, BMW, Mercedes, SEAT, or Opel directly on site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis ensures optimal audio analysis and fine-tuning of the car sound. Especially those who use high levels or special doorboards benefit from precise calibration.\u003c\/p\u003e\n\u003ch3\u003eVersatile Features and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003eSPL Lab SPL measuring devices have different models in the program, often with the following specifications:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMeasurement range\u003c\/th\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003cth\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart Meter Pro\u003c\/td\u003e\n\u003ctd\u003e30–155 dB\u003c\/td\u003e\n\u003ctd\u003e20–20,000 Hz\u003c\/td\u003e\n\u003ctd\u003e±1 dB\u003c\/td\u003e\n\u003ctd\u003e≥ 60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMini Bass Kit\u003c\/td\u003e\n\u003ctd\u003e25–150 dB\u003c\/td\u003e\n\u003ctd\u003e15–18,000 Hz\u003c\/td\u003e\n\u003ctd\u003e±1.5 dB\u003c\/td\u003e\n\u003ctd\u003e≥ 58 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPL Lab USB\u003c\/td\u003e\n\u003ctd\u003e25–160 dB\u003c\/td\u003e\n\u003ctd\u003e5–25,000 Hz\u003c\/td\u003e\n\u003ctd\u003e±1 dB\u003c\/td\u003e\n\u003ctd\u003e≥ 60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis variety allows every application, whether stationary in the acoustic laboratory or mobile in the car, to be precisely covered. Many variants also feature integrated memory functions to save measurement values. Other models offer Bluetooth modules for real-time transmission of acoustic data to smartphones or laptops, which significantly simplifies the documentation of sound pressure changes.\u003c\/p\u003e\n\u003ch3\u003eVoltmeter function for voltage monitoring\u003c\/h3\u003e\n\u003cp\u003eA special highlight is the integrated voltmeter function in various SPL Lab systems. Especially in car audio tuning, high currents are generated that require precise voltage measurement. This way, you can monitor during operation whether your amplifier is still operating within the correct voltage range. For example, if working with 14.4 volts, you get direct information about supply fluctuations or load peaks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous real-time display of operating voltage\u003c\/li\u003e\n\u003cli\u003eFast detection of supply interruptions for subwoofer amplifiers\u003c\/li\u003e\n\u003cli\u003eAvoidance of performance interruptions through targeted system optimization\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Accessories for a Perfect Measuring Setup\u003c\/h3\u003e\n\u003cp\u003eTo fully exploit the functionality of SPL Lab measurement microphones and SPL measuring devices, various accessories are helpful. Depending on the area of application and vehicle configuration, the following distinctions are made:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration adapter:\u003c\/strong\u003e For reliable zero point setting and determination of accurate measurement values.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension cable:\u003c\/strong\u003e Ideal if the measurement microphone is placed further away on the vehicle roof or in the trunk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport case:\u003c\/strong\u003e Stable cases for secure storage and transport, especially for frequent measurements in different cars.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Clips:\u003c\/strong\u003e Ensure an exact, wobble-free positioning on the headliner or rear seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach accessory is designed to meet the demands of discerning car audio enthusiasts and helps you achieve authentic acoustic results. Those who want to achieve even more precise tuning can combine the products with additional components such as noise-isolating measurement hoods or frequency spectrum analyzers.\u003c\/p\u003e\n\u003ch3\u003eInstallation tips for different vehicle configurations\u003c\/h3\u003e\n\u003cp\u003eEach vehicle type has individual acoustic characteristics. In Audi sports cars, resonance points on the doors can sometimes be disturbing, while in a SEAT Leon, the trunk becomes a bass trap. For accurate SPL measurements, the following recommendations are advisable:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone position:\u003c\/strong\u003e Near the headrests for driver focus, doors or footwell for targeted resonance identification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce obstacles:\u003c\/strong\u003e No objects or loose parts in the measuring environment that cause rattling or interfering noises.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegular calibration:\u003c\/strong\u003e Especially when comparing multiple measurements, the measuring technology should be continuously calibrated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse appropriate filters:\u003c\/strong\u003e For everyday noises, A-weighting is common, while C-weighting can be useful for low bass frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThose who want to delve deeper into the subject will find detailed information on the installation and use of various SPL measurement microphones in the Masori Audio Blog.\u003c\/p\u003e\n\u003ch3\u003eExpert support and AI chatbot for product compatibility\u003c\/h3\u003e\n\u003cp\u003eShould you have any questions about the suitable SPL Lab measuring devices before purchasing or are unsure which product best fits your car audio project, you can contact our team at any time \u003ca href=\"https:\/\/masprori.com\/pages\/faq-und-hilfe\"\u003eExpert Support\u003c\/a\u003e kontaktieren. There you will receive advice on product specifications, installation scenarios, and connection questions. Additionally, an AI chatbot is available to assist you in finding compatible items. This support prevents incorrect purchases and ensures that your planned upgrades work smoothly.\u003c\/p\u003e\n\u003ch3\u003eComprehensive selection for variable performance requirements\u003c\/h3\u003e\n\u003cp\u003eSPL Lab caters to different preferences with its product lines: from the compact entry-level microphone to the high-end analyzer for professionals. Those who want to perform quick measurements on the go often choose mobile models with battery power. For stationary measurement setups in workshops or professional soundchecks, SPL Lab complete systems with data transfer via USB or LAN are usually the first choice. For enthusiasts who want their car audio system in BMW, Opel, or VW not only louder but also sonically balanced, the analytical features (e.g., spectral display) are crucial.\u003c\/p\u003e\n\u003ch3\u003eOptimizing measurements for competition and everyday use\u003c\/h3\u003e\n\u003cp\u003eEspecially those who compete in dB-Drag events need reliable SPL meters that can accurately capture peak levels. Some SPL Lab models measure sound levels up to 160 dB, allowing extremely loud bass setups to be precisely tested. At the same time, constant monitoring of sound pressure is also interesting in everyday use, for example during individual tuning in the Audi S3 or the classic VW T4. This way, it can be checked whether the vehicle insulation successfully reduces vibrations and whether amplifiers operate within their optimal power limits.\u003c\/p\u003e\n\u003ch4\u003eConclusive out of conviction\u003c\/h4\u003e\n\u003cp\u003eAt Masori, you can buy all SPL Lab measurement microphones \u0026amp; SPL measuring devices at a low price and integrate them into your car audio setup. The different designs, extensive technical data, and clever accessories enable a razor-sharp evaluation of SPL levels in vehicles of various brands. Thanks to plug \u0026amp; play systems, professional \u003ca href=\"https:\/\/masprori.com\/pages\/einbauservice\"\u003eInstallation Service\u003c\/a\u003e in Frankfurt Oder and the dedicated Masori expert support, every sound measurement succeeds on the first try.\u003c\/p\u003e","products":[{"product_id":"spl-lab-wireless-bass-meter-te-3-version-spl-messgeraet","title":"Wireless Bass Meter TE (3. Version)","description":"\u003cp\u003eWireless Bass Meter TE (3rd Version) from SPL Lab is an SPL Meter with a frequency range of 10 to 120 Hz and an amplitude range of 110 to 190 dB. Calibrated according to TERM-LAB with a deviation from the Termlab Meter of up to 0.1 dB. Wired and wireless data transmission via Wi-Fi, optional USB adapter for Android. Supports Windows, Android, and iOS and can be used with mobile phones, tablets, and PCs. Battery life of up to 3 hours. Optional app for displaying the dB value along with a video recording. Free software for Windows.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003e3rd Version\u003c\/li\u003e\n\u003cli\u003eWired and wireless data transmission\u003c\/li\u003e\n\u003cli\u003eWi-Fi connection\u003c\/li\u003e\n\u003cli\u003eUSB adapter for Android\u003c\/li\u003e\n\u003cli\u003eSupports Windows, Android, and iOS\u003c\/li\u003e\n\u003cli\u003eCompatible with mobile phones, tablets, and PCs\u003c\/li\u003e\n\u003cli\u003eCalibrated according to TERM-LAB\u003c\/li\u003e\n\u003cli\u003eOptional app with dB display in video recording\u003c\/li\u003e\n\u003cli\u003eFree software for Windows\u003c\/li\u003e\n\u003cli\u003eIncluded: Wireless bass display, SPL Lab Measuring Center software for Windows, USB charging cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range 10–120 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range 110–190 dB\u003c\/li\u003e\n\u003cli\u003eDeviation from the Termlab Meter up to 0.1 dB\u003c\/li\u003e\n\u003cli\u003eBattery life of up to 3 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":39747612573875,"sku":"SPL-WBMTE-3GEN","price":427.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-wireless-bass-meter-te-3_-version-spl-messgerat-masori-kaufen.jpg?v=1781824866"},{"product_id":"spl-lab-usb-bass-meter-se-spl-messgeraet","title":"USB Bass Meter SE","description":"\u003cp\u003eUSB Bass Meter SE is an SPL Meter from SPL Lab for sound pressure measurements in the low-frequency range. It measures the sound pressure level from 120 to 183 dB in the frequency range of 10 to 120 Hz. The deviation from the official Termlab meter is a maximum of 0.1 dB and it is calibrated according to TERM-LAB. Data transmission is wired via USB. It can be used with smartphones, tablets, and PCs and supports Windows, Android, and iOS. The connection of Android smartphones is done via a USB adapter. An optional app displays the dB value along with a video recording. Free software for Windows is available.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003eSound pressure level measurement in the low-frequency range\u003c\/li\u003e\n\u003cli\u003eWired data transmission via USB\u003c\/li\u003e\n\u003cli\u003eSupports Windows, Android, and iOS\u003c\/li\u003e\n\u003cli\u003eUsable with smartphones, tablets, and PCs\u003c\/li\u003e\n\u003cli\u003eAndroid smartphone connection via USB adapter\u003c\/li\u003e\n\u003cli\u003eOptional app with dB display along with video recording\u003c\/li\u003e\n\u003cli\u003eCalibrated according to TERM-LAB\u003c\/li\u003e\n\u003cli\u003eDeviation from the official Termlab meter: maximum 0.1 dB\u003c\/li\u003e\n\u003cli\u003eFree software for Windows\u003c\/li\u003e\n\u003cli\u003eApplicable at unlimited sound pressure (AMT, EMMA, dB Drag, IASCA, BassRace)\u003c\/li\u003e\n\u003cli\u003eIncluded: USB Bass Meter SE, SPL Lab Measuring Center Software for Windows, audio CD with audio tracks (sine, sweep tones, noise), USB cable for charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range: 10–120 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range: 120–183 dB\u003c\/li\u003e\n\u003cli\u003eDeviation to Termlab: ≤ 0.1 dB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":40152547983539,"sku":"SPL-USBMT-2GEN","price":360.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-usb-bass-meter-se-spl-messgerat-masori-kaufen.jpg?v=1781825171"},{"product_id":"spl-lab-mini-bass-meter-spl-messgeraet","title":"Mini Bass Meter","description":"\u003cp\u003eMini Bass Meter is an SPL Meter from SPL Lab for sound pressure and noise measurements in the low-frequency range. It captures the sound pressure level as well as voltage, current, and the frequency of the peak spectrum. The frequency range is 20 to 120 Hz, the amplitude range is 120 to 160 dB, and the voltage range is 1 to 20 volts. The deviation from the Termlab Meter is a maximum of 0.1 dB. The device operates completely autonomously, features a bright display, and is calibrated according to TERM-LAB Classic and Magnum. A compact housing with four segments, 3 control buttons, a mini-USB port for power supply and firmware updates, as well as a socket for the cigarette lighter are integrated. The software is updatable, and a mounting option for the windshield is available.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003eAutonomous operation without software\u003c\/li\u003e\n\u003cli\u003eBright display\u003c\/li\u003e\n\u003cli\u003eCompact housing with four segments\u003c\/li\u003e\n\u003cli\u003e3 control buttons\u003c\/li\u003e\n\u003cli\u003eMini-USB port for power supply and firmware updates\u003c\/li\u003e\n\u003cli\u003eSocket for cigarette lighter\u003c\/li\u003e\n\u003cli\u003eMounting option for windshield available\u003c\/li\u003e\n\u003cli\u003eCalibrated according to TERM-LAB Classic and Magnum\u003c\/li\u003e\n\u003cli\u003eUpdatable software\u003c\/li\u003e\n\u003cli\u003eMeasurement of sound pressure level (SPL)\u003c\/li\u003e\n\u003cli\u003eVoltage measurement\u003c\/li\u003e\n\u003cli\u003eCurrent measurement\u003c\/li\u003e\n\u003cli\u003eMeasurement of maximum voltage\u003c\/li\u003e\n\u003cli\u003eMeasurement of minimum voltage\u003c\/li\u003e\n\u003cli\u003eVoltage measurement at the time of the highest SPL value\u003c\/li\u003e\n\u003cli\u003eMeasurement of the frequency of the peak spectrum\u003c\/li\u003e\n\u003cli\u003eNoise measurement\u003c\/li\u003e\n\u003cli\u003eSpeaker mode like Subwoofer\u003c\/li\u003e\n\u003cli\u003eScope of delivery: Mini Bass Meter and cable for connection to the cigarette lighter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range: 20 to 120 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range: 120 to 160 dB\u003c\/li\u003e\n\u003cli\u003eVoltage range: 1 to 20 volts\u003c\/li\u003e\n\u003cli\u003eDeviation from the Termlab Meter: maximum 0.1 dB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":40173868351667,"sku":"SPL-MINI-BM","price":265.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-mini-bass-meter-spl-messgerat-masori-kaufen.jpg?v=1781825179"},{"product_id":"spl-lab-smart-voltmeter-voltmeter","title":"Smart Voltmeter","description":"\u003cp\u003eThe SPL Lab Smart Voltmeter is a digital voltmeter with three operating modes and adjustable data refresh rates from 1 s to 0.25 s. The measurement rate is up to 4 measurements per second, and the measurement voltage ranges up to 18 volts. A bright three-segment display and three colored LEDs indicate the active mode, complemented by four control buttons. The display color can be selected in blue or red. The allowable voltage range is flexibly adjustable, and a peak-hold feature shows minimum or maximum values. In protection mode, the remote control circuit can be interrupted, with a switching current of up to 3 amperes. The housing is compact and provides a slot with five contacts.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eVoltmeter\u003c\/li\u003e\n\u003cli\u003eCompact housing\u003c\/li\u003e\n\u003cli\u003eBright three-segment display\u003c\/li\u003e\n\u003cli\u003eDisplay color selectable: Blue or Red\u003c\/li\u003e\n\u003cli\u003eThree colored LEDs for mode indication\u003c\/li\u003e\n\u003cli\u003eFour control buttons\u003c\/li\u003e\n\u003cli\u003eSlot with five contacts\u003c\/li\u003e\n\u003cli\u003eThree operating modes: Voltmeter; Voltmeter with display of sag and swell; Voltmeter with display of sag and swell and protection function\u003c\/li\u003e\n\u003cli\u003ePeak-hold for minimum or maximum value\u003c\/li\u003e\n\u003cli\u003eProtection function with interruption of the control circuit\u003c\/li\u003e\n\u003cli\u003eFlexibly adjustable allowable voltage range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement voltage up to 18 V\u003c\/li\u003e\n\u003cli\u003eMeasurement rate up to 4 measurements per second\u003c\/li\u003e\n\u003cli\u003eData refresh rate on the display adjustable from 1 s to 0.25 s\u003c\/li\u003e\n\u003cli\u003eSwitching current of the remote control circuit up to 3 A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Blue","offer_id":40173893648563,"sku":"SPL-SMART-VM-BLUE","price":69.0,"currency_code":"EUR","in_stock":true},{"title":"Rot","offer_id":40173893681331,"sku":"SPL-SMART-VM-RED","price":65.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-smart-voltmeter-voltmeter-masori-kaufen.jpg?v=1781825190"},{"product_id":"spl-lab-next-lab-spl-sensor-spl-messgeraet","title":"Next-Lab SPL Sensor","description":"\u003cp\u003eThe SPL Lab Next-Lab SPL Sensor is an SPL Meter designed for operation with Next-LCD and Next-USB. The signal is digitized internally via a 16-bit ADC and transmitted digitally over the Lab Bus. Cable signal transmission is possible up to 10 m. An extended amplitude range and a noise reduction system allow for measurement accuracy of up to 0.1 dB. Calibrated according to TERM-LAB, each unit is tested and calibrated. Monoblock design with high-frequency semiconductor sensor, integrated ADC module, and Lab Bus interface including Lab Bus port. Vacuum suction cups on the back for attachment to smooth surfaces like glass, housing made of impact-resistant plastic. Frequency range 10–120 Hz with an amplitude range of 110–185 dB; Wide Band Edition with 10–20000 Hz and 100–182 dB. Supports measurement of sound pressure level (SPL), spectral analysis (AFC), signal waveform, and measurement of harmonic distortions of low-frequency signals as well as measurement of noise levels and characteristics of acoustic systems.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003eLab Bus digital bus\u003c\/li\u003e\n\u003cli\u003eInternal 16-bit ADC\u003c\/li\u003e\n\u003cli\u003eSignal digitization directly in the sensor\u003c\/li\u003e\n\u003cli\u003eDigital data transmission via Lab Bus\u003c\/li\u003e\n\u003cli\u003eCable length for data transmission up to 10 m\u003c\/li\u003e\n\u003cli\u003eExtended amplitude range\u003c\/li\u003e\n\u003cli\u003eNoise reduction system\u003c\/li\u003e\n\u003cli\u003eMeasurement accuracy up to 0.1 dB\u003c\/li\u003e\n\u003cli\u003eCalibrated according to TERM-LAB\u003c\/li\u003e\n\u003cli\u003eMonoblock design\u003c\/li\u003e\n\u003cli\u003eHigh-frequency semiconductor sensor\u003c\/li\u003e\n\u003cli\u003eIntegrated ADC module\u003c\/li\u003e\n\u003cli\u003eLab Bus interface with Lab Bus port\u003c\/li\u003e\n\u003cli\u003eHousing made of impact-resistant plastic\u003c\/li\u003e\n\u003cli\u003eVacuum suction cups for attachment to smooth surfaces like glass\u003c\/li\u003e\n\u003cli\u003eCompatible with Next-LCD and Next-USB\u003c\/li\u003e\n\u003cli\u003eMeasurement of sound pressure level (SPL)\u003c\/li\u003e\n\u003cli\u003eSpectral analysis (AFC)\u003c\/li\u003e\n\u003cli\u003eReceive and analyze signal waveform\u003c\/li\u003e\n\u003cli\u003eMeasurement of harmonic distortions of low-frequency signals\u003c\/li\u003e\n\u003cli\u003eMeasurement of noise levels\u003c\/li\u003e\n\u003cli\u003eMeasurement of characteristics of acoustic systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range standard: 10–120 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range standard: 110–185 dB\u003c\/li\u003e\n\u003cli\u003eFrequency range Wide Band Edition: 10–20000 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range Wide Band Edition: 100–182 dB\u003c\/li\u003e\n\u003cli\u003eInternal precision ADC: 16 bit\u003c\/li\u003e\n\u003cli\u003eMeasurement accuracy: up to 0.1 dB\u003c\/li\u003e\n\u003cli\u003eCalibration: TERM-LAB\u003c\/li\u003e\n\u003cli\u003eData transmission: digital via Lab Bus\u003c\/li\u003e\n\u003cli\u003eMaximum cable length for transmission: 10 m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Next-Lab SPL Sensor","offer_id":45110595715339,"sku":"NEXT-LAB-SPL-NORMAL","price":284.05,"currency_code":"EUR","in_stock":true},{"title":"Next-Lab SPL Sensor (Wide Band Edition)","offer_id":45110595748107,"sku":"NEXT-LAB-SPL-EIDE","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-next-lab-spl-sensor-spl-messgerat-masori-kaufen.jpg?v=1781826209"},{"product_id":"spl-lab-next-usb-spl-messgeraet","title":"Next USB","description":"\u003cp\u003eThe next USB product is an SPL Meter from SPL Lab with four independent Lab Bus connections for pressure sensors, microphones, or power sensors. It does not have a built-in display and is not intended for standalone operation. Control and data transfer occur via USB to a PC or optionally wirelessly through a built-in Wi-Fi module to a tablet PC or smartphone. Simultaneous operation with four signal sources is possible. The monoblock design includes a control button, a USB port for connecting to the PC and charging, four Lab Bus connections, a power switch, and a three-color LED to indicate status and battery charge. The housing is made of shock-resistant plastic. The system is cascadeable. Measurements are supported with Next-Lab SPL Sensor, Next-Lab RTA Microphone, and Next-Lab Power Sensor.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003eFour independent Lab Bus connections for pressure sensors, microphones, or power sensors\u003c\/li\u003e\n\u003cli\u003eSimultaneous operation with four signal sources\u003c\/li\u003e\n\u003cli\u003eControl and data transfer via USB with PC\u003c\/li\u003e\n\u003cli\u003eOptional wireless connection via built-in Wi-Fi module with tablet PC or smartphone\u003c\/li\u003e\n\u003cli\u003eCompatible with Next-Lab SPL Sensor, Next-Lab RTA Microphone, Next-Lab Power Sensor\u003c\/li\u003e\n\u003cli\u003eCascadeable\u003c\/li\u003e\n\u003cli\u003eNo built-in display, not for standalone operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eDesign: Monoblock\u003c\/li\u003e\n\u003cli\u003eHousing material: shock-resistant plastic\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, Wi-Fi optional\u003c\/li\u003e\n\u003cli\u003eControls: control button, power switch\u003c\/li\u003e\n\u003cli\u003eDisplay: three-color LED for status and battery level\u003c\/li\u003e\n\u003cli\u003eUSB port for PC connection and charging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":44546777448715,"sku":"NEXT-USB","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-next-usb-spl-messgerat-masori-kaufen.jpg?v=1781828860"},{"product_id":"spl-lab-next-lab-power-sensor-spl-messgeraet","title":"Next-Lab Power Sensor","description":"\u003cp\u003eThe Next-Lab Power Sensor is an SPL Meter from SPL Lab with a digital lab bus and internal dual-channel ADC. It allows measurements of direct current circuits (only Hall sensor version) as well as alternating current circuits with a frequency of up to 15000 Hz. The non-contact current sensor covers 1 to 1200 A (Hall sensor version) or up to 400 A in the current clamp version. The voltage measurement ranges from 1 to 300 volts. The power measurement is up to 360 kW (Hall sensor version) or up to 120 kW (current clamp version). True-RMS algorithm, impedance measurement, and distortion detector (clip) are integrated.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003eDigital lab bus\u003c\/li\u003e\n\u003cli\u003eInternal dual-channel ADC\u003c\/li\u003e\n\u003cli\u003eNon-contact current sensor 1 to 1200 A (Hall sensor version)\u003c\/li\u003e\n\u003cli\u003eNon-contact current sensor up to 400 A (current clamp version)\u003c\/li\u003e\n\u003cli\u003eMeasurement of direct current circuits (only Hall sensor version)\u003c\/li\u003e\n\u003cli\u003eMeasurement of alternating current circuits up to 15000 Hz\u003c\/li\u003e\n\u003cli\u003eVoltage measurement 1 to 300 V\u003c\/li\u003e\n\u003cli\u003ePower measurement up to 360 kW (Hall sensor version)\u003c\/li\u003e\n\u003cli\u003ePower measurement up to 120 kW (current clamp version)\u003c\/li\u003e\n\u003cli\u003eTrue-RMS algorithm\u003c\/li\u003e\n\u003cli\u003eImpedance measurement\u003c\/li\u003e\n\u003cli\u003eDistortion detector (clip)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eAssessment of the quality index of electrical home and industrial networks\u003c\/li\u003e\n\u003cli\u003eMeasurement of direct current, voltage, and power (only Hall sensors)\u003c\/li\u003e\n\u003cli\u003eMeasurement of alternating current, voltage, and power according to True-RMS\u003c\/li\u003e\n\u003cli\u003eMeasurement of the impedance of acoustic systems\u003c\/li\u003e\n\u003cli\u003eDetermination of the harmonic distortion coefficient\u003c\/li\u003e\n\u003cli\u003eMeasurement of the AFC of the audio path\u003c\/li\u003e\n\u003cli\u003eReceiving and analyzing the signal waveform\u003c\/li\u003e\n\u003cli\u003eAdjusting the levels (gain) of various amplifier channels to each other\u003c\/li\u003e\n\u003cli\u003eTuning the car radio and amplifiers by monitoring the harmonic distortion, AFC, and waveform of the reproduced signal\u003c\/li\u003e\n\u003cli\u003eSetting and adjusting the cutoff frequencies for crossovers and internal filters\u003c\/li\u003e\n\u003cli\u003eFine-tuning the components of the audio system\u003c\/li\u003e\n\u003cli\u003eSetting the distortion factor coefficient\u003c\/li\u003e\n\u003cli\u003ePackage contents: power sensor\u003c\/li\u003e\n\u003cli\u003ePackage contents: lab bus connection cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Current clamps (400A)","offer_id":44912969416971,"sku":"NEXT-LAB-POWER-CLAMP","price":259.0,"currency_code":"EUR","in_stock":true},{"title":"Hall Sensor (1200A)","offer_id":44912969449739,"sku":"NEXT-LAB-POWER-HALL","price":376.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-next-lab-power-sensor-spl-messgerat-masori-kaufen.jpg?v=1782935659"},{"product_id":"spl-lab-lcd-bass-meter-spl-messgeraet","title":"LCD Bass Meter","description":"\u003cp\u003eLCD Bass Meter is an SPL Meter from SPL Lab. It operates completely autonomously and can be powered by a built-in battery or via USB. A bright, two-line LCD display with backlighting shows measurement data in the frequency range of 10 to 120 Hz and in the amplitude range of 120 to 185 dB. The device is calibrated according to TERM-LAB and allows for the connection of NEXT-LAB sensors as well as data transfer to a PC. The USB port enables power supply, firmware updates, and data transfer. The housing is made of shock-resistant plastic, the sensor is detachable and equipped with vacuum suction cups for smooth surfaces. The sensor cable can be several meters long. The accompanying software is freely available.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003eCompletely autonomous\u003c\/li\u003e\n\u003cli\u003ePower supply via battery or USB\u003c\/li\u003e\n\u003cli\u003eBright, two-line LCD display with backlighting\u003c\/li\u003e\n\u003cli\u003eCalibrated according to TERM-LAB\u003c\/li\u003e\n\u003cli\u003eConnection of NEXT-LAB sensors\u003c\/li\u003e\n\u003cli\u003eUSB port for power supply, firmware updates, and data transfer\u003c\/li\u003e\n\u003cli\u003eDetachable sensor with vacuum suction cups for smooth surfaces\u003c\/li\u003e\n\u003cli\u003eHousing made of shock-resistant plastic\u003c\/li\u003e\n\u003cli\u003eData transfer to PC\u003c\/li\u003e\n\u003cli\u003eFree software\u003c\/li\u003e\n\u003cli\u003eIncluded: main unit, NEXT-LAB SPL pressure sensor, sensor connecting cable, USB connecting cable, SPL Lab measurement center software for Windows, audio CD with audio tracks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range: 10–120 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range: 120–185 dB\u003c\/li\u003e\n\u003cli\u003eDisplay: two-line LCD with backlighting\u003c\/li\u003e\n\u003cli\u003ePower supply: internal battery or USB\u003c\/li\u003e\n\u003cli\u003eUSB functions: power supply, device firmware update, data transfer to PC\u003c\/li\u003e\n\u003cli\u003eCalibration: TERM-LAB\u003c\/li\u003e\n\u003cli\u003eSensor unit: detachable, attachment with vacuum suction cups\u003c\/li\u003e\n\u003cli\u003eSensor cable: length several meters\u003c\/li\u003e\n\u003cli\u003eCompatibility: NEXT-LAB SPL sensor, NEXT-LAB RTA microphone sold separately, NEXT-LAB Power Sensor sold separately\u003c\/li\u003e\n\u003cli\u003eMeasurement displays: peak value, average level, harmonic distortion coefficient\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":45070116880651,"sku":"LCD-BASS-METER","price":427.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-lcd-bass-meter-spl-messgerat-masori-kaufen.jpg?v=1782935692"},{"product_id":"spl-lab-usb-rta-meter-pro-edition-messmikrofon","title":"USB RTA Meter (Pro Edition)","description":"\u003cp\u003eThe SPL Lab USB RTA Meter (Pro Edition) is a Measurement Microphone made of anodized aluminum with a highly sensitive, omnidirectional electret microphone capsule, integrated low-frequency amplifier, and precision ADC with 16 bits. It operates in the frequency range of 10 to 20,000 Hz and covers an amplitude range of 50 to 120 dB. Data transmission is done via a mini-USB connection. Special notches around the microphone capsule support a smooth directional characteristic, and the acoustically correct design focuses on an input signal close to the original. Calibrated according to Audiomatica CLIO. Free SPL Lab measurement center software for Windows and Android. Tripod mounting possible.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement Microphone\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing\u003c\/li\u003e\n\u003cli\u003eHighly sensitive, omnidirectional electret microphone capsule\u003c\/li\u003e\n\u003cli\u003eIntegrated low-frequency amplifier\u003c\/li\u003e\n\u003cli\u003eSpecial notches for smooth directional characteristic\u003c\/li\u003e\n\u003cli\u003eAcoustically correct design\u003c\/li\u003e\n\u003cli\u003eTripod mounting possible\u003c\/li\u003e\n\u003cli\u003eFree software\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range: 10 Hz to 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range: 50 dB to 120 dB\u003c\/li\u003e\n\u003cli\u003eCalibration: Audiomatica CLIO\u003c\/li\u003e\n\u003cli\u003eIntegrated precision ADC: 16 bits\u003c\/li\u003e\n\u003cli\u003eConnection: Mini-USB\u003c\/li\u003e\n\u003cli\u003eIncluded: USB microphone\u003c\/li\u003e\n\u003cli\u003eIncluded: USB cable for connection to PC\u003c\/li\u003e\n\u003cli\u003eIncluded: SPL Lab measurement center software for Windows and Android\u003c\/li\u003e\n\u003cli\u003eIncluded: Audio CD with audio tracks for tuning (sine, sweep tones, noise)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":45070130381067,"sku":"USB-RTA-METER","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-usb-rta-meter-pro-edition-messmikrofon-masori-kaufen.jpg?v=1782935693"},{"product_id":"spl-lab-usb-noise-meter-pro-edition-messmikrofon","title":"USB Noise Meter (Pro Edition)","description":"\u003cp\u003eThe USB Noise Meter (Pro Edition) is a Measurement Microphone from SPL Lab with a frequency range of 10 to 20,000 Hz. It captures an amplitude range of 80 to 150 dB and has a dynamic range of 70 dB. An integrated 16-bit ADC and a mini-USB port handle the digitization and connection. The anodized aluminum housing contains the highly sensitive microphone element and a low-frequency amplifier; special notches around the element support a smoother directional characteristic. The housing is acoustically designed to avoid additional overtones and distortions. The free software allows for spectral analysis, measurement of the absolute sound pressure level, and adjustment and alignment of the AFC. If needed, installation on a stand is possible.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement Microphone\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing\u003c\/li\u003e\n\u003cli\u003eHighly sensitive microphone element\u003c\/li\u003e\n\u003cli\u003eIntegrated low-frequency amplifier\u003c\/li\u003e\n\u003cli\u003eBuilt-in 16-bit ADC\u003c\/li\u003e\n\u003cli\u003eMini-USB port\u003c\/li\u003e\n\u003cli\u003eSpecial notches for smoother directional characteristic\u003c\/li\u003e\n\u003cli\u003eAcoustically designed housing\u003c\/li\u003e\n\u003cli\u003eInstallation on stand possible\u003c\/li\u003e\n\u003cli\u003eFree software\u003c\/li\u003e\n\u003cli\u003eSPL Lab Measurement Center software for Windows and Android\u003c\/li\u003e\n\u003cli\u003eSpectral analysis\u003c\/li\u003e\n\u003cli\u003eMeasurement of the absolute sound pressure level\u003c\/li\u003e\n\u003cli\u003eAdjustment and alignment of the AFC\u003c\/li\u003e\n\u003cli\u003eQuantitative assessment of the frequency response ripple\u003c\/li\u003e\n\u003cli\u003eDefining the harmonic distortion coefficient\u003c\/li\u003e\n\u003cli\u003eReceiving and analyzing the signal waveform\u003c\/li\u003e\n\u003cli\u003eUSB cable included\u003c\/li\u003e\n\u003cli\u003eAudio CD with audio tracks (sine, sweep tones, noise)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range: 10 to 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range: 80 to 150 dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 70 dB\u003c\/li\u003e\n\u003cli\u003eADC: 16 Bit\u003c\/li\u003e\n\u003cli\u003eConnection: Mini-USB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":45070145061131,"sku":"USB-NOISE-METER","price":449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-usb-noise-meter-pro-edition-messmikrofon-masori-kaufen.jpg?v=1782935694"},{"product_id":"spl-lab-event-mode-module-1-jahr-messmikrofon","title":"Event Mode Module (1 Jahr)","description":"\u003cp\u003eEvent Mode Module (1 Year) is a Measurement Microphone from SPL Lab. It features a simple interface and flexible settings. The precise recording of measurement data is complemented by data encryption and an encrypted individual database. It is compatible with Windows XP, Vista, 7, and 8 in 32 and 64 Bit. Working with two displays as well as displaying data on a second monitor is provided. It supports working with two data sources and capturing an unlimited number of measurement data. General and individual measurement statistics can be displayed, and data can be sorted and filtered according to flexible criteria. Data protection against changes and data export are integrated. Creating and holding competitions in a custom format is possible. The duration is 1 year.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement Microphone\u003c\/li\u003e\n\u003cli\u003eDuration 1 Year\u003c\/li\u003e\n\u003cli\u003eSimple interface\u003c\/li\u003e\n\u003cli\u003eFlexible settings\u003c\/li\u003e\n\u003cli\u003ePrecise recording of measurement data\u003c\/li\u003e\n\u003cli\u003eData encryption\u003c\/li\u003e\n\u003cli\u003eEncrypted individual database\u003c\/li\u003e\n\u003cli\u003eWorking with two displays\u003c\/li\u003e\n\u003cli\u003eDisplaying data on the second monitor\u003c\/li\u003e\n\u003cli\u003eWorking with two data sources\u003c\/li\u003e\n\u003cli\u003eCapturing an unlimited number of measurement data\u003c\/li\u003e\n\u003cli\u003eDisplaying general and individual measurement statistics\u003c\/li\u003e\n\u003cli\u003eSorting and filtering data according to flexible criteria\u003c\/li\u003e\n\u003cli\u003eData protection against changes\u003c\/li\u003e\n\u003cli\u003eData export\u003c\/li\u003e\n\u003cli\u003eCreating and holding competitions in a custom format\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows XP, Vista, 7, 8 (32 and 64 Bit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eOperating system compatibility: Windows XP, Vista, 7, 8 (32 and 64 Bit)\u003c\/li\u003e\n\u003cli\u003eSupport for two displays or display on second monitor\u003c\/li\u003e\n\u003cli\u003eSupport for two data sources\u003c\/li\u003e\n\u003cli\u003eCapturing an unlimited number of measurement data\u003c\/li\u003e\n\u003cli\u003eDuration 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":45070160593163,"sku":"EVENT-MODE-MODULE","price":75.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-event-mode-module-1-jahr-messmikrofon-masori-kaufen.jpg?v=1782935697"},{"product_id":"spl-lab-next-lcd-spl-messgeraet","title":"Next LCD","description":"\u003cp\u003eThe next LCD product is an autonomous SPL Meter from SPL Lab with a graphical display and backlighting. Two lab bus connections are provided for connecting sensors, complemented by an integrated signal generator for sine and noise. The internal battery, a USB port for charging and PC connection, as well as two RCA outputs of the audio signal generator are integrated. The software is updatable and allows data transfer to the PC, with optional Wi-Fi support. The device is designed as a monoblock, has 8 control buttons, and a three-color LED to indicate status and battery charge. The housing is made of shock-resistant plastic; display of spectrum and waveform as well as operation with two signal sources are provided.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Meter\u003c\/li\u003e\n\u003cli\u003eCompletely autonomous\u003c\/li\u003e\n\u003cli\u003eInternal battery\u003c\/li\u003e\n\u003cli\u003eGraphical display with backlighting\u003c\/li\u003e\n\u003cli\u003eTwo lab bus connections for connecting sensors\u003c\/li\u003e\n\u003cli\u003eAudio signal generator: sine, noise\u003c\/li\u003e\n\u003cli\u003eUpdatable software\u003c\/li\u003e\n\u003cli\u003eData transfer to the PC\u003c\/li\u003e\n\u003cli\u003eOptional Wi-Fi support\u003c\/li\u003e\n\u003cli\u003eUSB port for charging and PC connection\u003c\/li\u003e\n\u003cli\u003eTwo RCA outputs of the audio signal generator\u003c\/li\u003e\n\u003cli\u003e8 control buttons\u003c\/li\u003e\n\u003cli\u003eThree-color LED for status and charge indication\u003c\/li\u003e\n\u003cli\u003eMonoblock design\u003c\/li\u003e\n\u003cli\u003eHousing made of shock-resistant plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware modes: SPL mode for measuring sound pressure peak values with spectrum and waveform display, distortion clip detector, simultaneous operation with two signal sources\u003c\/li\u003e\n\u003cli\u003eAVG mode for measuring the temporal average value of a sound pressure, simultaneous operation with two signal sources\u003c\/li\u003e\n\u003cli\u003eRTA mode for measuring AFC with spectrum and waveform display, spectrum division into octaves, distortion clip detector\u003c\/li\u003e\n\u003cli\u003ePWR mode for measuring alternating and direct current, voltage, power, signal frequency, and nonlinear distortion clip, simultaneous operation with two signal sources\u003c\/li\u003e\n\u003cli\u003eGEN mode: background stereo generator for test signals sine, pink noise, white noise\u003c\/li\u003e\n\u003cli\u003eCON mode: connection to the PC, adjustment and transfer of digitized data for analysis in Measuring Center for Windows\u003c\/li\u003e\n\u003cli\u003eFunctions: measuring sound pressure with Next-Lab SPL sensor\u003c\/li\u003e\n\u003cli\u003eMeasuring AFC and spectral analysis of the signal with Next-Lab RTA microphone\u003c\/li\u003e\n\u003cli\u003eMeasurement of the power characteristics of direct and alternating current circuits with Next-Lab Power Sensor\u003c\/li\u003e\n\u003cli\u003eSimultaneous operation with two signal sources\u003c\/li\u003e\n\u003cli\u003eAudio signal generator operates in the background alongside measurement\u003c\/li\u003e\n\u003cli\u003eDisplay of signal form and spectrum on the screen\u003c\/li\u003e\n\u003cli\u003eDigital display of measurement values on the screen\u003c\/li\u003e\n\u003cli\u003eControl and data transfer via USB port or wireless network to a PC\u003c\/li\u003e\n\u003cli\u003ePreparation and execution of car audio competitions AMT, EMMA, dB Drag, IASCA, BassRace as well as via the internet optionally\u003c\/li\u003e\n\u003cli\u003eMeasurement of the characteristics of acoustic systems for home, in cars, or in concert halls and their setup\u003c\/li\u003e\n\u003cli\u003eErgonomics: USB port for connection to a PC and for charging\u003c\/li\u003e\n\u003cli\u003eTwo lab bus connections for sensors\u003c\/li\u003e\n\u003cli\u003eTwo RCA outputs of the audio signal generator\u003c\/li\u003e\n\u003cli\u003eDelivery switch\u003c\/li\u003e\n\u003cli\u003eThree-color LED to indicate status and battery charge\u003c\/li\u003e\n\u003cli\u003eMonoblock design, housing made of shock-resistant plastic\u003c\/li\u003e\n\u003cli\u003eScope of delivery: main unit\u003c\/li\u003e\n\u003cli\u003eUSB connection cable for charging and connecting to a PC\u003c\/li\u003e\n\u003cli\u003eSPL Lab measuring center software for Windows\u003c\/li\u003e\n\u003cli\u003eAudio CD with audio tracks for tuning sine, sweep tones, noise\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":45070175174923,"sku":"NEXT-LCD","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-next-lcd-spl-messgerat-masori-kaufen.jpg?v=1782935698"},{"product_id":"spl-lab-next-lab-rta-messmikrofon","title":"Next-Lab RTA","description":"\u003cp\u003eThe Next-Lab RTA is a Measurement Microphone from SPL Lab with Lab-Bus digital bus and anodized aluminum housing. The frequency range is from 10 to 20000 Hz. The amplitude range covers 50 to 120 dB, with the High SPL Edition ranging from 60 to 155 dB. The internal accuracy is ADC 16 Bit. Calibration is done according to Audiomatica CLIO, and for the High SPL Edition, it is calibrated according to TERM-LAB. Highly sensitive, omnidirectional electret microphone inserts, low-frequency amplifiers, ADC units, and a Lab-Bus interface are integrated; special notches surround the microphone insert, allowing for tripod mounting.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement Microphone\u003c\/li\u003e\n\u003cli\u003eLab-Bus digital bus\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing\u003c\/li\u003e\n\u003cli\u003eHighly sensitive, omnidirectional electret microphone inserts\u003c\/li\u003e\n\u003cli\u003eLow-frequency amplifier integrated\u003c\/li\u003e\n\u003cli\u003eADC units integrated\u003c\/li\u003e\n\u003cli\u003eLab-Bus interface\u003c\/li\u003e\n\u003cli\u003eLab-Bus port for data transmission\u003c\/li\u003e\n\u003cli\u003eSpecial notches around the microphone insert\u003c\/li\u003e\n\u003cli\u003eTripod mounting possible\u003c\/li\u003e\n\u003cli\u003eCalibrated according to Audiomatica CLIO\u003c\/li\u003e\n\u003cli\u003eCalibrated according to TERM-LAB (High SPL Edition)\u003c\/li\u003e\n\u003cli\u003eIncluded: microphone for measuring AFC, Lab-Bus connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range 10 to 20000 Hz\u003c\/li\u003e\n\u003cli\u003eAmplitude range 50 to 120 dB\u003c\/li\u003e\n\u003cli\u003eAmplitude range 60 to 155 dB (High SPL Edition)\u003c\/li\u003e\n\u003cli\u003eInternal accuracy ADC 16 Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Next-Lab RTA","offer_id":45070200635659,"sku":"NEXT-LAB-RTA-1","price":259.0,"currency_code":"EUR","in_stock":true},{"title":"Next-Lab RTA High SPL","offer_id":45070200701195,"sku":"NEXT-LAB-RTA-SPL","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-next-lab-rta-messmikrofon-masori-kaufen.jpg?v=1782935699"},{"product_id":"spl-lab-smart-monitor-se-messgeraet","title":"Smart Monitor SE","description":"\u003cp\u003eThe Smart Monitor SE from SPL Lab is a versatile SPL meter suitable for use in both automotive and home audio systems. It features a high-resolution color display and a powerful processor that enables real-time waveform analysis. This compact device offers two independent measurement channels, as well as a channel for monitoring the 12V vehicle electrical system. It is also equipped with a flexible protection system that safeguards connected audio equipment by shutting off the remote circuit when predefined limits are exceeded. A USB interface allows you to connect the device to a PC for more in-depth analysis of the measurement signals. With its robust, impact-resistant plastic construction, the Smart Monitor SE offers both durability and reliability in operation.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul class=\"produce-desc fx fx-wrap\"\u003e\n\n\u003cli\u003e Voltage: 1–150 V \u003csub\u003eRMS\u003c\/sub\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e Current: 1–120 A \u003csub\u003eRMS\u003c\/sub\u003e\n\n\u003c\/li\u003e\n\n \u003cli\u003ePower (apparent power): 1–18000 VA\u003c\/li\u003e\n\n\u003cli\u003e Frequency range: 10–15000 Hz\u003c\/li\u003e\n\n\u003cli\u003e Measurement type: DC and AC quantities\u003c\/li\u003e\n\n\u003cli\u003e Connection type: Quick-release (plug connector)\u003c\/li\u003e\n\n\u003cli\u003e Interface \/ Expansion port: USB-C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Smart Monitor SE device\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e Spl-Lab Measuring Center Software for Windows\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e Audio CD with adjustment tracks (sine tones, sweeps, noise)\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e External current sensors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":52848747806987,"sku":null,"price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-smart-monitor-se-spl-messgerat-masori-kaufen.webp?v=1769560662"},{"product_id":"spl-lab-next-lcd-se-messgeraet","title":"Next-LCD SE","description":"\u003cp\u003eThe Next-LCD SE from SPL Lab is a versatile SPL Meter designed for precise sound pressure measurements. Equipped with a high-resolution color display, it offers real-time readings and allows for cascading use with multiple sensors and microphones via Lab Bus ports. Thanks to integrated features such as distortion and clip detection, as well as flexible power supply via USB-C or batteries, it is ideal for both car audio competitions and use in home and professional sound systems. With various software modes like SPL, AVG, and RTA, you can perform comprehensive measurements and analyze the results directly on the display. Its compact and robust design ensures easy handling and smooth operation in various environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutonomous Measuring Device with high-resolution color display for real-time display\u003c\/li\u003e\n\u003cli\u003eCascadable via two Lab Bus ports for sensors and microphones\u003c\/li\u003e\n\u003cli\u003eSimultaneous operation with two different signal sources possible\u003c\/li\u003e\n\u003cli\u003eIntegrated distortion and clip detector for clean tuning\u003c\/li\u003e\n\u003cli\u003eFlexible power supply via USB-C or batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSound pressure measurement with Next-Lab SPL Sensor\u003c\/li\u003e\n\u003cli\u003eFrequency response measurement and spectral analysis with Next-Lab RTA Microphone\u003c\/li\u003e\n\u003cli\u003eVolt-ampere measurement in AC\/DC circuits with Next-Lab Power Sensor\u003c\/li\u003e\n\u003cli\u003eSimultaneous operation with two signal sources\u003c\/li\u003e\n\u003cli\u003eDisplay of waveform and spectrum directly on the display\u003c\/li\u003e\n\u003cli\u003eNumerical measurement display in real-time\u003c\/li\u003e\n\u003cli\u003eDevice control and data transfer to PC via USB-C\u003c\/li\u003e\n\u003cli\u003eFine-tuning of car audio, home, and professional sound systems\u003c\/li\u003e\n\u003cli\u003eMeasurement and adjustment of vehicle and industrial power grids\u003c\/li\u003e\n\u003cli\u003eSuitable for car audio competitions like AMT, EMMA, dB Drag, and IASCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware Modes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSPL Mode: Peak sound pressure measurement with spectrum and waveform\u003c\/li\u003e\n\u003cli\u003eAVG Mode: Capture of time-averaged sound pressure values\u003c\/li\u003e\n\u003cli\u003eRTA Mode: Frequency response measurement with spectral representation in octave bands\u003c\/li\u003e\n\u003cli\u003ePWR Mode: Measurement of current, voltage, power, frequency, and clip\u003c\/li\u003e\n\u003cli\u003eSQL Mode: Volume measurement for front and rear systems\u003c\/li\u003e\n\u003cli\u003eHybrid Modes: SPL+PWR and AVG+PWR to determine acoustic efficiency\u003c\/li\u003e\n\u003cli\u003ePC Mode: Data transfer to the SPL Lab Measuring Center Software\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eErgonomics \u0026amp; Connections\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact monoblock housing made of impact-resistant plastic\u003c\/li\u003e\n\u003cli\u003eHigh-resolution color display with backlighting\u003c\/li\u003e\n\u003cli\u003eFour control buttons and tri-color LED for status indication\u003c\/li\u003e\n\u003cli\u003eTwo digital Lab Bus ports for external sensors\u003c\/li\u003e\n\u003cli\u003eUSB-C port for power supply and data transfer\u003c\/li\u003e\n\u003cli\u003eOperation via USB-C or four AA batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eScope of Delivery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMain device Next-LCD SE\u003c\/li\u003e\n\u003cli\u003eUSB cable for power supply or PC connection\u003c\/li\u003e\n\u003cli\u003eSPL Lab Measuring Center Software for Windows\u003c\/li\u003e\n\u003cli\u003eAudio CD with setup tracks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPL Lab","offers":[{"title":"Default Title","offer_id":53321009168651,"sku":"Next-LCD SE","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/spl-lab-next-lcd-se-spl-messgerat-masori-kaufen.webp?v=1787698954"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/collections\/spl-lab-lautstarke-messgerate-masori-audio-carhifi-auto-subwoofer-lautsprecher-verstaerker-kaufen.png?v=1755207404","url":"https:\/\/masprori.com\/en\/collections\/spl-lab-volume-measuring-devices.oembed","provider":"Masori | Shop","version":"1.0","type":"link"}