{"title":"1-Channel Marine Amplifier for the Boat","description":"\u003ch2\u003eBuy Cheap: 1-Channel Marine Amplifier in the Car Audio Online Shop Masori\u003c\/h2\u003e\n\u003cp\u003eThose looking for a powerful yet space-saving marine amplifier can choose from a wide variety of 1-channel marine amplifiers in the Masori car audio online shop. Whether for use on a smaller motorboat, a sailing yacht, or in car models from Audi, VW, BMW, Mercedes, SEAT, or Opel – these mono amps can be integrated flexibly and often even plug \u0026amp; play. High-quality protective coatings against moisture and vibrations make them ideal for maritime environments and, at the same time, for car audio upgrades. Even in rough seas or with heavily vibrating car bodies, 1-channel marine amplifiers handle their task effortlessly. If you have questions about product compatibility with your car or boat, you can use our AI chatbot or contact expert support at \u003ca href=\"https:\/\/masprori.com\/pages\/faq-und-hilfe\" target=\"_blank\"\u003eMasori FAQ \u0026amp; Help\u003c\/a\u003e contact.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data and Performance Features at a Glance\u003c\/h3\u003e\n\u003cp\u003e1-channel marine amplifiers impress with clear bass reproduction and precise level control. Typical RMS power ratings range from 50 watts to 1000 watts per channel, allowing even power-hungry subwoofers to be operated reliably. The impedance ranges are usually between 2 ohms and 4 ohms, with Class D designs being particularly efficient.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRMS range: 50 to 1000 watts (mono operation)\u003c\/li\u003e\n\u003cli\u003eFrequency response: up to 20 Hz – 250 Hz (subwoofer optimized)\u003c\/li\u003e\n\u003cli\u003eImpedance options: 2 ohms, 4 ohms (partially 1 ohm stable)\u003c\/li\u003e\n\u003cli\u003eProtection functions: Overheat protection, corrosion protection, short circuit protection\u003c\/li\u003e\n\u003cli\u003eClasses: Class AB for balanced sound, Class D for maximum efficiency\u003c\/li\u003e\n\u003cli\u003eBridgable output power on some models\u003c\/li\u003e\n\u003cli\u003eOptional integrated DSP for sound optimization\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClass D versions are particularly popular because they generate less heat and can be easily installed on boats with limited space as well as in vehicles with small trunks.\u003c\/p\u003e\n\u003ch4\u003eTypical performance values in comparison\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRMS @ 4 Ohm\u003c\/th\u003e\n\u003cth\u003eRMS @ 2 Ohm\u003c\/th\u003e\n\u003cth\u003eProtection class\u003c\/th\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmpire X-M50\u003c\/td\u003e\n\u003ctd\u003e50 watts\u003c\/td\u003e\n\u003ctd\u003e80 watts\u003c\/td\u003e\n\u003ctd\u003eIPX Standards\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRockford Fosgate M100\u003c\/td\u003e\n\u003ctd\u003e100 Watt\u003c\/td\u003e\n\u003ctd\u003e150 watts\u003c\/td\u003e\n\u003ctd\u003eMarine Grade\u003c\/td\u003e\n\u003ctd\u003eClass AB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHertz HMD1\u003c\/td\u003e\n\u003ctd\u003e200 watts\u003c\/td\u003e\n\u003ctd\u003e300 watts\u003c\/td\u003e\n\u003ctd\u003eIP64\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCerwin Vega MW500\u003c\/td\u003e\n\u003ctd\u003e250 watts\u003c\/td\u003e\n\u003ctd\u003e500 watts\u003c\/td\u003e\n\u003ctd\u003eSaltwater-resistant\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eMany models use an expandable low-pass or high-pass filter. This allows subwoofers to be perfectly integrated into the overall system, while such marine amplifiers are equally interesting for car audio enthusiasts who want high levels with low installation depth.\u003c\/p\u003e\n\u003ch3\u003eMore product details from the manufacturer\u003c\/h3\u003e\n\u003cp\u003eThe brands Ampire, Rockford Fosgate, and Hertz offer compact housing dimensions and clever mounting options. At the same time, Cerwin Vega and Soundigital impress with ultra-robust circuit board layouts for harsh operating conditions. Gladen, Ground Zero, and ESX also have special tunings for subwoofers, while DD Audio and JL Audio rely on flexible voltage ranges. All manufacturers offer models with generous heat sinks, which prevent overheating even during 2-ohm operation. A digital signal processor (DSP) enables fine-tuning of the sound curve to optimally adjust frequency responses in the range of 20 Hz to 20 kHz.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmpire: ultra-compact, high efficiency, Plug\u0026amp;Play options\u003c\/li\u003e\n\u003cli\u003eRockford Fosgate: strong punch, proven marine protective coating\u003c\/li\u003e\n\u003cli\u003eHertz: precise bass control, clear mids, stable amplifiers\u003c\/li\u003e\n\u003cli\u003eCerwin Vega: rich low-end, solid cooling concepts, Class D\u003c\/li\u003e\n\u003cli\u003eSundown Audio: high vapor factor, true deep bass performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Important Accessories\u003c\/h3\u003e\n\u003cp\u003eThe installation of a 1-channel marine amplifier requires waterproof connectors and corrosion-resistant cable lugs. Even those planning to use the system in a car should opt for high-quality power cables (for example, 20 mm² or 35 mm² cross-section) to minimize voltage drops. Additionally, audio-specific shielded RCA cables must be used to prevent interference noise. For professional installation, we recommend our \u003ca href=\"https:\/\/masprori.com\/pages\/einbauservice\" target=\"_blank\"\u003eInstallation service in Frankfurt Oder\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAdditional mounting accessories can facilitate integration into boat or vehicle cabins:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistribution blocks for positive and ground wires\u003c\/li\u003e\n\u003cli\u003eRemote cable or automatic power-on function (with high-level input)\u003c\/li\u003e\n\u003cli\u003eRubber seals and clamps for vibration damping\u003c\/li\u003e\n\u003cli\u003eCinch adapter for radios without modern preamplifier output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication area and individual sound\u003c\/h3\u003e\n\u003cp\u003eWhether on the open sea or in lowered tuned cars: marine amplifiers with a 1-channel output expand a subwoofer so that low frequencies sound more dominant and powerful. Different designs (monoblock, bridged connection) are possible. The frequency response can be adjusted via a low-pass filter between 20 Hz and about 250 Hz, allowing the sound profile to be precisely matched to the existing speaker configuration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoat systems with two or four speakers, complemented by an active subwoofer\u003c\/li\u003e\n\u003cli\u003eCarhifi retrofits in VW or BMW to give OEM speakers more bass foundation\u003c\/li\u003e\n\u003cli\u003ePlug\u0026amp;Play variants for Mercedes, SEAT, Opel or other manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith integrated DSPs, the bass boost can be precisely adjusted to avoid creating frequency gaps. The phase adjustment of the subwoofers is also automatically controlled, which ensures even bass distribution, especially in sporty models with limited interior space or on compact boats.\u003c\/p\u003e\n\u003ch3\u003eSpecial features of maritime installations and car audio upgrades\u003c\/h3\u003e\n\u003cp\u003eSince moisture and saltwater can particularly stress the electronics, marine amplifiers use water-repellent circuit board coatings and sealed connection terminals. Similar advantages apply to SUVs or off-road vehicles that are exposed to dust and splash water. Users benefit from multiple protection circuits such as temperature monitoring and overvoltage detection, which also promote a long service life when tuning car audio systems. With Class D circuits, temperatures remain in the safe range and prevent shutdowns due to thermal overload.\u003c\/p\u003e\n\u003ch3\u003eService, advice, and installation support\u003c\/h3\u003e\n\u003cp\u003eIf you are unsure which 1-channel marine amplifier suits your boat type or car, you can contact the Masori team directly. Through our \u003ca href=\"https:\/\/masprori.com\/pages\/faq-und-hilfe\" target=\"_blank\"\u003eExpert Support\u003c\/a\u003e or the AI chatbot, interested parties receive needs-based advice including tips on the suitable wiring harness. We are also happy to take care of the complete installation on-site in Frankfurt Oder. Cable routes, seals, and the placement of cooling elements are carefully planned. This way, boat enthusiasts and car audio fans alike receive a tailor-made sound upgrade.\u003c\/p\u003e\n\u003ch3\u003eConclusion on 1-Channel Marine Amplifiers and Car Audio Applications\u003c\/h3\u003e\n\u003cp\u003eWhether in the maritime sector or for car audio: 1-channel marine amplifiers offer enormous potential to reliably power subwoofers and provide a rich bass range. With various classes (AB, D), power ranges from 50 to 1000 watts RMS, and built-in protection features, they are durable components even under challenging conditions. The choice between brands like Ampire, Rockford Fosgate, Hertz, Cerwin Vega, Ground Zero, or JL Audio allows for a finely tuned combination of size, cooling, impedance, and sound quality. In the Masori car audio online shop, all necessary parts – from amplifiers to cables and DSP modules – can be easily purchased online and optimized for the respective application.\u003c\/p\u003e","products":[{"product_id":"ground-zero-hydrogen-gzha-mini-one-k-24v-1-kanal-verstaerker","title":"Hydrogen GZHA MINI ONE-K 24V","description":"\u003cp\u003eHydrogen GZHA MINI ONE-K 24V is a 1-Channel Amplifier from Ground Zero with Class D technology and SMD components. Compact mono design with stabilized Power Supply and link mode. Only for 24V systems, not suitable for 12V vehicles. Variable active crossover, bass boost, and phase adjustment. High-level input with auto-on function. Level remote control included. Generously sized connections and compact heat sink with engraved Ground Zero logo. Frequency response 10–200 Hz. Output power 340 Watts RMS at 4 Ω, 600 Watts RMS at 2 Ω, 1000 Watts RMS at 1 Ω, maximum output power 1200 Watts. Dimensions 135 x 322 x 52 mm.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eClass D technology\u003c\/li\u003e\n\u003cli\u003eComponents in SMD technology\u003c\/li\u003e\n\u003cli\u003eCompact mono 1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eStabilized Power Supply\u003c\/li\u003e\n\u003cli\u003eLink mode (connection of two amplifiers)\u003c\/li\u003e\n\u003cli\u003eVariable active crossover\u003c\/li\u003e\n\u003cli\u003eBass boost\u003c\/li\u003e\n\u003cli\u003ePhase adjustment\u003c\/li\u003e\n\u003cli\u003eOnly for 24V systems (trucks, marine), not suitable for 12V vehicles\u003c\/li\u003e\n\u003cli\u003eGenerously sized connections\u003c\/li\u003e\n\u003cli\u003eCompact heat sink with engraved Ground Zero logo\u003c\/li\u003e\n\u003cli\u003eLevel remote control included\u003c\/li\u003e\n\u003cli\u003eHigh-level input with auto-on function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eType: Class D compact amplifier\u003c\/li\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003cli\u003eOutput power at 4 Ω: 340 Watts RMS\u003c\/li\u003e\n\u003cli\u003eOutput power at 2 Ω: 600 Watts RMS\u003c\/li\u003e\n\u003cli\u003eOutput power at 1 Ω: 1000 Watts RMS\u003c\/li\u003e\n\u003cli\u003eMaximum output power (CEA-2006A \/ 10% THD+N): 1200 Watts\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10–200 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (W x L x H): 135 x 322 x 52 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ground Zero","offers":[{"title":"Default Title","offer_id":34570451583126,"sku":"GROU0124","price":360.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/ground-zero-hydrogen-gzha-mini-one-k-24v-1-kanal-verstarker-masori-kaufen.webp?v=1786488635"},{"product_id":"soundigital-800-1-evops-1-kanal-verstaerker","title":"800.1 EVOPS","description":"\u003cp\u003eSoundigital 800.1 EVOPS is a 1-Channel Amplifier available in 2 or 4 Ohm versions. The amplifier delivers up to 1 x 800 WRMS and operates with a supply voltage of 8–16 V, a total efficiency of 85%, and a damping factor of 200. The frequency response (-3 dB) ranges from 5–500 Hz, the Crossover includes HPF 5–30 Hz and LPF 50–500 Hz, and the bass boost is 0–12 dB at 50 Hz. The signal values include 90 dB SNR and 0.1% THD+N (10% rated power). Constructive features include IP64 protection against vibration and corrosion, conformal coating, improved internal electrical components, gold tracing on the circuit boards, and Tiffany Style RCA connectors. The dimensions are 14.4 x 13 x 5.6 cm, the current draw is 32 A (music) or 65 A (max), and the recommended Fuse (music) is 40 A.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eAvailable as 2 or 4 Ohm version\u003c\/li\u003e\n\u003cli\u003eRMS power up to 1 x 800 WRMS\u003c\/li\u003e\n\u003cli\u003eIP64 protection against vibration and corrosion\u003c\/li\u003e\n\u003cli\u003eConformal coating\u003c\/li\u003e\n\u003cli\u003eImproved internal electrical components\u003c\/li\u003e\n\u003cli\u003eGold tracing on the circuit boards\u003c\/li\u003e\n\u003cli\u003eTiffany Style RCA connectors\u003c\/li\u003e\n\u003cli\u003eSupply voltage 8–16 V\u003c\/li\u003e\n\u003cli\u003eTotal efficiency 85%\u003c\/li\u003e\n\u003cli\u003eDamping factor 200\u003c\/li\u003e\n\u003cli\u003eFrequency response (-3 dB) 5–500 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover HPF 5–30 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover LPF 50–500 Hz\u003c\/li\u003e\n\u003cli\u003eBass boost 0–12 dB @ 50 Hz\u003c\/li\u003e\n\u003cli\u003eSNR 90 dB\u003c\/li\u003e\n\u003cli\u003eTHD+N (10% rated power) 0.1%\u003c\/li\u003e\n\u003cli\u003eCurrent draw (music) 32 A\u003c\/li\u003e\n\u003cli\u003eCurrent draw (max) 65 A\u003c\/li\u003e\n\u003cli\u003eRecommended Fuse (music) 40 A\u003c\/li\u003e\n\u003cli\u003eDimensions 14.4 x 13 x 5.6 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003ePower 2 Ohm version @ 4 Ohm: 1 x 528 WRMS\u003c\/li\u003e\n\u003cli\u003ePower 2 Ohm version @ 2 Ohm: 1 x 800 WRMS\u003c\/li\u003e\n\u003cli\u003ePower 4 Ohm version @ 4 Ohm: 1 x 800 WRMS\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 8–16 V\u003c\/li\u003e\n\u003cli\u003eCurrent draw (music): 32 A\u003c\/li\u003e\n\u003cli\u003eCurrent draw (max): 65 A\u003c\/li\u003e\n\u003cli\u003eRecommended Fuse (music): 40 A\u003c\/li\u003e\n\u003cli\u003eTotal efficiency: 85%\u003c\/li\u003e\n\u003cli\u003eDamping factor: 200\u003c\/li\u003e\n\u003cli\u003eFrequency response (-3 dB): 5–500 Hz\u003c\/li\u003e\n\u003cli\u003eSNR: 90 dB\u003c\/li\u003e\n\u003cli\u003eCrossover HPF: 5–30 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover LPF: 50–500 Hz\u003c\/li\u003e\n\u003cli\u003eTHD+N (10% rated power): 0.1%\u003c\/li\u003e\n\u003cli\u003eBass boost: 0–12 dB @ 50 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions: 14.4 x 13 x 5.6 cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Soundigital","offers":[{"title":"2 Ohm","offer_id":39929484378291,"sku":"SD800-1EVOPS-2OHM","price":499.0,"currency_code":"EUR","in_stock":true},{"title":"4 Ohm","offer_id":39929484411059,"sku":"SD800-1EVOPS-4OHM","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/soundigital-800_1-evops-1-kanal-verstarker-masori-kaufen.webp?v=1747886442"},{"product_id":"audiocontrol-acm-1-300-1-kanal-verstaerker","title":"ACM-1.300","description":"\u003cp\u003eThe ACM-1.300 is a 1-channel amplifier from Audiocontrol, specifically designed for car audio systems. This amplifier impresses with its compact size and high power, allowing it to seamlessly integrate into factory stereo systems. Equipped with ACCUBASS® technology, the ACM-1.300 is a prime example of solid performance combined with innovative features. Its special characteristics, such as reversible cover plates for flexible mounting options and seamless integration into Audiocontrol DM series processors, make it an excellent companion for discerning audio enthusiasts on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e300 Watts at 2 Ohms\u003c\/li\u003e\n\u003cli\u003e175 Watts at 4 Ohms\u003c\/li\u003e\n\u003cli\u003eAccuBASS® processing\u003c\/li\u003e\n\u003cli\u003eGTOTM Signal Sense\u003c\/li\u003e\n\u003cli\u003eActive speaker-level inputs for OEM integration\u003c\/li\u003e\n\u003cli\u003eRCA Line Inputs\u003c\/li\u003e\n\u003cli\u003eLinkwitz-Riley crossover\u003c\/li\u003e\n\u003cli\u003eOptional ACR-1 Level Remote Control\u003c\/li\u003e\n\u003cli\u003eReversible cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENTRANCES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePreamp inputs: 2 balanced\u003c\/li\u003e\n\u003cli\u003ePreamplifier input voltage range: 500 mV - 6 Vrms\u003c\/li\u003e\n\u003cli\u003eSpeaker level inputs: 2\u003c\/li\u003e\n\u003cli\u003eSpeaker level input voltage range: 3 V - 40 Vrms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEXITS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous (RMS) rated power at 14.4 V:\u003c\/li\u003e\n\u003cli\u003e4 Ω - 175 W RMS\u003c\/li\u003e\n\u003cli\u003e2 Ω - 300 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eperformance capability\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency response: 10 Hz - 22 kHz\u003c\/li\u003e\n\u003cli\u003eNoise level: 102 dBA, Ref 175 W @ 4 Ohm\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u003c 0.01%\u003c\/li\u003e\n\u003cli\u003eCurrent\/Ground wire gauge: 10 to 4 AWG wire\u003c\/li\u003e\n\u003cli\u003eProtection value: 1 x 30 A\u003c\/li\u003e\n\u003cli\u003eCrossover: 12 dB\/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass\u003c\/li\u003e\n\u003cli\u003ePFM Subsonic Filter: 24 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWEIGHT \u0026 DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: \u003cspan\u003e23.8 x 7.6 x 4.4cm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 0.95 kg \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"et_pb_section et_pb_section_2 specifications-car et_pb_with_background et_section_regular\"\u003e\n\u003cdiv class=\"et_pb_row et_pb_row_8\"\u003e\n\u003cdiv class=\"et_pb_column et_pb_column_1_2 et_pb_column_16  et_pb_css_mix_blend_mode_passthrough et-last-child\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Audiocontrol","offers":[{"title":"Default Title","offer_id":43716162552075,"sku":"ACM-1.300","price":304.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/audiocontrol-acm-1_300-1-kanal-verstarker-masori-kaufen.webp?v=1776973871"},{"product_id":"rockford-fosgate-punch-pm100x1k-1-kanal-verstaerker","title":"Punch PM100X1K","description":"\u003cp\u003eThe Punch PM100X1K is a 1-Channel Amplifier from Rockford Fosgate with 60 Watts x 1 at 4 Ohm and 100 Watts x 1 at 2 Ohm RMS power. The patented BTL-driven FreeLoad technology utilizes the DC and AC voltages present at standard speaker outputs and draws B+ and audio signal directly from the speaker outputs. An optional B+ connection is available for non-standard speaker outputs. The selectable 4 and 2 Ohm playback, high-level activation, and a 60\/80\/100 Hz high-pass filter with 12 dB\/octave (Butterworth) are integrated. The dynamic power is 61 Watts x 1 at 4 Ohm and 109 Watts x 1 at 2 Ohm. The small, unobtrusive housing uses an extruded aluminum heat sink, and the circuit board is conformally coated. Protection features include current limiting, thermal protection, as well as short circuit and overvoltage protection. The frequency response is 60 Hz to 20 kHz ±1.0 dB, the operating voltage is 9–16 V DC, and the amplifier is sold in pairs.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003ePatented BTL-driven FreeLoad technology\u003c\/li\u003e\n\u003cli\u003eDraws B+ and audio signal from standard speaker outputs; optional B+ connection for non-standard speaker outputs\u003c\/li\u003e\n\u003cli\u003eSelectable 4 and 2 Ohm playback\u003c\/li\u003e\n\u003cli\u003eHigh-level activation\u003c\/li\u003e\n\u003cli\u003e60\/80\/100 Hz high-pass Crossover, 12 dB\/octave (Butterworth)\u003c\/li\u003e\n\u003cli\u003eSoft turn-on\u003c\/li\u003e\n\u003cli\u003eCurrent limiting to protect the main unit (4 and 2 Ohm configurations)\u003c\/li\u003e\n\u003cli\u003eExtruded aluminum heat sink\u003c\/li\u003e\n\u003cli\u003eCircuit board with conformal coating\u003c\/li\u003e\n\u003cli\u003eSmall, unobtrusive housing\u003c\/li\u003e\n\u003cli\u003ePig Tail connection option\u003c\/li\u003e\n\u003cli\u003eDiscrete surface mount technology\u003c\/li\u003e\n\u003cli\u003eThermal protection\u003c\/li\u003e\n\u003cli\u003eShort circuit and overvoltage protection\u003c\/li\u003e\n\u003cli\u003eSold in pairs (left\/right)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eNumber of channels: 1\u003c\/li\u003e\n\u003cli\u003eTotal power (sum of rated power): 100 Watts\u003c\/li\u003e\n\u003cli\u003eRMS power: 60 Watts x 1 @ 4 Ohm\u003c\/li\u003e\n\u003cli\u003eRMS power: 100 Watts x 1 @ 2 Ohm\u003c\/li\u003e\n\u003cli\u003eDynamic power: 61 Watts x 1 @ 4 Ohm\u003c\/li\u003e\n\u003cli\u003eDynamic power: 109 Watts x 1 @ 2 Ohm\u003c\/li\u003e\n\u003cli\u003eBridgeable: No\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz to 20 kHz ±1.0 dB\u003c\/li\u003e\n\u003cli\u003eTHD+N 4 Ohm: \u003c1.0 %\u003c\/li\u003e\n\u003cli\u003eTHD+N 2 Ohm: \u003c1.0 %\u003c\/li\u003e\n\u003cli\u003eCrossover high-pass: selectable 60 Hz, 80 Hz, 100 Hz @ 12 dB\/octave (Butterworth)\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 9–16 V DC\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 33 x 76.2 x 99.1 mm\u003c\/li\u003e\n\u003cli\u003eShipping weight: 1.27 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":44476041363723,"sku":"PM100X1K","price":237.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/rockford-fosgate-punch-pm100x1k-1-kanal-verstarker-masori-kaufen.webp?v=1786489564"},{"product_id":"hertz-venezia-v1-1-kanal-verstaerker","title":"Venezia V1","description":"\u003cp\u003eVenezia V1 is a 1-Channel Amplifier from Hertz with Advanced Class D Technology and 1260 W @ 1 Ohm. Designed for marine applications with resistance to salt mist, UV light, and vibrations. Fanless cooling and fully differential input circuit. Supply voltage 9–16 VDC, minimum load impedance 1 Ohm, bandwidth 10–500 Hz. Distortion \u003c0.02 % (100 Hz @ 4 Ohm), signal-to-noise ratio 102 dB (A-weighted @ 1 V), damping factor 500 (100 Hz @ 4 Ohm). Adjustable crossovers, Low-Pass 50–500 Hz @ 24 dB\/Oct, High-Pass 50–250 Hz @ 12 dB\/Oct at Pre-Out, Subsonic 25 Hz @ 24 dB\/Oct, Phase 0–180°, Bass Boost 50 Hz 0–12 dB. PRE IN, Bypass Full, Current Draw @ 1 Ohm and 14.4 VDC (maximum musical power) 52 A.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eMarine Version with Resistance to Salt Mist, UV Light, and Vibrations\u003c\/li\u003e\n\u003cli\u003eAdvanced Class D Technology\u003c\/li\u003e\n\u003cli\u003eFanless Cooling\u003c\/li\u003e\n\u003cli\u003eFully Differential Input Circuit\u003c\/li\u003e\n\u003cli\u003eInputs PRE IN\u003c\/li\u003e\n\u003cli\u003ePre-Out High-Pass 50–250 Hz @ 12 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eFilter Yes\u003c\/li\u003e\n\u003cli\u003eBypass Yes Full\u003c\/li\u003e\n\u003cli\u003eLow-Pass 50–500 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003ePhase 0–180°\u003c\/li\u003e\n\u003cli\u003eSubsonic 25 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eBass Boost 50 Hz 0–12 dB\u003c\/li\u003e\n\u003cli\u003eLoad Impedance minimum 1 Ohm\u003c\/li\u003e\n\u003cli\u003eAdjustable Crossovers\u003c\/li\u003e\n\u003cli\u003eRMS Output Power @ 14.4 VDC, THD 1% 1 Channel 700 W\u003c\/li\u003e\n\u003cli\u003eRMS Output Power @ 14.4 VDC, THD 1% 1 Channel 1260 W\u003c\/li\u003e\n\u003cli\u003eTotal Power RMS 1260 W\u003c\/li\u003e\n\u003cli\u003eOptional Accessories HRC BM2 Subwoofer Remote Control with Level -20 to +6 dB and Molex Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eChannels 1\u003c\/li\u003e\n\u003cli\u003eSupply Voltage 9–16 VDC\u003c\/li\u003e\n\u003cli\u003ePower On\/Off 1 A \/ 0.04 mA\u003c\/li\u003e\n\u003cli\u003eCurrent Draw @ 1 Ohm, 14.4 VDC maximum musical power 52 A\u003c\/li\u003e\n\u003cli\u003eRemote Input 7–15 VDC 1 mA\u003c\/li\u003e\n\u003cli\u003eDistortion \u003c0.02 % (100 Hz @ 4 Ohm)\u003c\/li\u003e\n\u003cli\u003eBandwidth 10–500 Hz\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise Ratio (A-weighted @ 1 V) 102 dB\u003c\/li\u003e\n\u003cli\u003eDamping Factor (100 Hz @ 4 Ohm) 500\u003c\/li\u003e\n\u003cli\u003eSensitivity 0.2–5 VRMS\u003c\/li\u003e\n\u003cli\u003ePre-In Impedance 10 kOhm\u003c\/li\u003e\n\u003cli\u003eHigh-Pass Pre-Out 50–250 Hz @ 12 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eLow-Pass 50–500 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eSubsonic 25 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003ePhase 0–180°\u003c\/li\u003e\n\u003cli\u003eBass Boost 50 Hz 0–12 dB\u003c\/li\u003e\n\u003cli\u003eDimension A 270 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 240 mm\u003c\/li\u003e\n\u003cli\u003eDimension C 185 mm\u003c\/li\u003e\n\u003cli\u003eDimension D 155 mm\u003c\/li\u003e\n\u003cli\u003eDimension E 54 mm\u003c\/li\u003e\n\u003cli\u003eWeight 2.72 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":44580379197707,"sku":"VENEZIA-V1","price":490.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/hertz-venezia-v1-1-kanal-verstarker-masori-kaufen.webp?v=1747929155"},{"product_id":"hertz-venezia-v1-24v-1-kanal-verstaerker","title":"Venezia V1 24V","description":"\u003cp\u003eVenezia V1 24V is a 1-Channel Amplifier from Hertz with Advanced Class D technology and supply voltage 22–33 VDC. The RMS power is 1260 W at 1 Ohm, the bandwidth is 10–500 Hz, the signal-to-noise ratio is 102 dB (A-weighted @ 1 V), the total harmonic distortion is \u003c0.02 % (100 Hz @ 4 Ohm), and the damping factor is 500 (100 Hz @ 4 Ohm). Inputs and filters: PRE IN, Pre-Out high-pass 50–250 Hz @ 12 dB\/Oct, low-pass 50–500 Hz @ 24 dB\/Oct, subsonic 25 Hz @ 24 dB\/Oct, phase 0–180°, bass boost 50 Hz 0–12 dB. Pre-In impedance 10 kΩ, input sensitivity 0.2–5 VRMS, minimum load impedance 1 Ohm, remote input 7–33 VDC (1 mA), remote output 14–33 VDC. Fanless operation and protection features against short circuit, overload, and overheating; designed and tested for marine applications. Dimensions A 270 mm, B 240 mm, C 185 mm, D 155 mm, E 54 mm; weight 2.72 kg.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eHertz Advanced Class D technology\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 22–33 VDC\u003c\/li\u003e\n\u003cli\u003eRMS power at 1 Ohm: 1260 W\u003c\/li\u003e\n\u003cli\u003eAdjustable crossovers\u003c\/li\u003e\n\u003cli\u003eLow-Pass: 50–500 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eHigh-pass (Pre-Out): 50–250 Hz @ 12 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eSubsonic: 25 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003ePhase: 0–180°\u003c\/li\u003e\n\u003cli\u003eBass boost 50 Hz: 0–12 dB\u003c\/li\u003e\n\u003cli\u003eInputs: PRE IN\u003c\/li\u003e\n\u003cli\u003ePre-Out available\u003c\/li\u003e\n\u003cli\u003eFanless operation\u003c\/li\u003e\n\u003cli\u003eProtection: Short circuit, overload, overheating\u003c\/li\u003e\n\u003cli\u003eDesigned and tested for marine applications\u003c\/li\u003e\n\u003cli\u003eOptional: HRC BM2 Subwoofer remote control, level -20 to +6 dB, Molex connection\u003c\/li\u003e\n\u003cli\u003eDimensions: A 270 mm, B 240 mm, C 185 mm, D 155 mm, E 54 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.72 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003cli\u003eTotal RMS power: 1260 W\u003c\/li\u003e\n\u003cli\u003eOutput power RMS @ 28.8 VDC, THD 1% (1 channel): 700 W\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 22–33 VDC\u003c\/li\u003e\n\u003cli\u003eRemote input: 7–33 VDC, 1 mA\u003c\/li\u003e\n\u003cli\u003eRemote-Out voltage: 14–33 VDC\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (100 Hz @ 4 Ohm): \u003c0.02 %\u003c\/li\u003e\n\u003cli\u003eBandwidth: 10–500 Hz\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio (A-weighted @ 1 V): 102 dB\u003c\/li\u003e\n\u003cli\u003eDamping factor (100 Hz @ 4 Ohm): 500\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 0.2–5 VRMS\u003c\/li\u003e\n\u003cli\u003ePre-In impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 1 Ohm\u003c\/li\u003e\n\u003cli\u003eFilter: Yes\u003c\/li\u003e\n\u003cli\u003eBypass: Yes (Full)\u003c\/li\u003e\n\u003cli\u003eLow-Pass: 50–500 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eHigh-pass (Pre-Out): 50–250 Hz @ 12 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eSubsonic: 25 Hz @ 24 dB\/Oct\u003c\/li\u003e\n\u003cli\u003ePhase: 0–180°\u003c\/li\u003e\n\u003cli\u003eBass boost 50 Hz: 0–12 dB\u003c\/li\u003e\n\u003cli\u003eInrush current: 1 A\u003c\/li\u003e\n\u003cli\u003eCut-off current: 0.04 mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":44580438704395,"sku":"VENEZIA-V1-24V","price":490.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/hertz-venezia-v1-24v-1-kanal-verstarker-masori-kaufen.webp?v=1747929163"},{"product_id":"hertz-hmd1-1-kanal-verstaerker","title":"HMD1","description":"\u003cp\u003eHMD1 is a 1-Channel Amplifier from Hertz with a total RMS power of 1000 Watts. Output power: 500 Watts at 4 Ω, 800 Watts at 2 Ω, and 1000 Watts at 1 Ω. The minimum load impedance is 1 Ohm. The supply voltage is 11–15 VDC with 2 x 30 A fuses, operating at 6.5–17 VDC. Idle current is 1.3 A, idle current when off is 0.05 mA, consumption at 14.4 VDC and 2 Ω (max. music power) is 50 A. Inputs: Pre-In via RCA and wired speaker inputs; input sensitivity Pre-In selectable 0.6–2.0–6.0 VRMS, Speaker-In selectable 2.0–6.5–20 VRMS. Distortion (THD) @ 1 kHz, 4 Ω, 70% rated power 0.1%, damping factor @ 1 kHz, 4 Ω, 2 VRMS 140, bandwidth @ -1.5 dB 10 Hz–500 Hz, signal-to-noise ratio (A-weighted @ 1 V input) 110 dBA. Adjustable crossovers and ART automatic on\/off for OUTPUT BTL speakers (selectable) 2–7 VDC, remote IN 6.5–15 VDC (1 mA). Dimensions 243 x 48 x 159 mm and weight 1.98 kg.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003cli\u003eOutput power 1 channel @ 4 Ω: 500 Watts\u003c\/li\u003e\n\u003cli\u003eOutput power 1 channel @ 2 Ω: 800 Watts\u003c\/li\u003e\n\u003cli\u003eOutput power 1 channel @ 1 Ω: 1000 Watts\u003c\/li\u003e\n\u003cli\u003eTotal RMS power: 1000 Watts\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 1 Ohm\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 11–15 VDC\u003c\/li\u003e\n\u003cli\u003eFuses: 2 x 30 A\u003c\/li\u003e\n\u003cli\u003eOperating supply voltage: 6.5–17 VDC\u003c\/li\u003e\n\u003cli\u003eIdle current: 1.3 A\u003c\/li\u003e\n\u003cli\u003eIdle current when off: 0.05 mA\u003c\/li\u003e\n\u003cli\u003eConsumption @ 14.4 VDC, 2 Ω, max. music power: 50 A\u003c\/li\u003e\n\u003cli\u003eAdjustable crossovers: yes\u003c\/li\u003e\n\u003cli\u003ePre-In inputs: RCA\u003c\/li\u003e\n\u003cli\u003eSpeaker inputs: wired\u003c\/li\u003e\n\u003cli\u003eART automatic on\/off for OUTPUT BTL speakers (selectable): 2–7 VDC\u003c\/li\u003e\n\u003cli\u003eRemote IN: 6.5–15 VDC (1 mA)\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 243 x 48 x 159 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.98 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eDistortion – THD @ 1 kHz, 4 Ω, 70% rated power: 0.1%\u003c\/li\u003e\n\u003cli\u003eDamping factor @ 1 kHz, 4 Ω, 2 VRMS: 140\u003c\/li\u003e\n\u003cli\u003eBandwidth @ -1.5 dB: 10 Hz – 500 Hz\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio (A-weighted @ 1 V input) Master input: 110 dBA\u003c\/li\u003e\n\u003cli\u003eInput sensitivity Pre-In selectable: 0.6 – 2.0 – 6.0 VRMS\u003c\/li\u003e\n\u003cli\u003eInput sensitivity Speaker-In selectable: 2.0 – 6.5 – 20 VRMS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":44581553111307,"sku":"HMD1","price":617.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/hertz-hmd1-1-kanal-verstarker-masori-kaufen.webp?v=1747929237"},{"product_id":"hertz-hmd1-24v-1-kanal-verstaerker","title":"HMD1 24V","description":"\u003cp\u003eHMD1 24V is a 1-Channel Amplifier from Hertz in marine design. It delivers 1 channel with 1000 watts at 1 ohm, 800 watts at 2 ohms, and 500 watts at 4 ohms with a minimum load impedance of 1 ohm. The bandwidth is 10 Hz to 500 Hz, the signal-to-noise ratio is 110 dBA, the damping factor is 140, and the distortion factor is 0.1 percent at 1 kHz, 4 ohms, and 70 percent rated power. The supply voltage is 22–34 VDC with 2 x 15 A fuse, the operating voltage is 14–36 VDC; the idle current is 0.7 A and the consumption is 25 A at 14.4 VDC, 2 ohms, and maximum music power. Inputs are available as pre-in RCA and wired speaker inputs, and the crossovers are adjustable. The dimensions are 243 x 48 x 159 mm with a weight of 1.98 kg. Remote control IN 6.5–34 VDC (1 mA) and ART automatic on\/off switching of OUTPUT BTL speakers (selectable) 2–7 VDC are integrated.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eMarine Amplifier\u003c\/li\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003cli\u003eOutput power 1 channel @ 4 Ω: 500 watts\u003c\/li\u003e\n\u003cli\u003eOutput power 1 channel @ 2 Ω: 800 watts\u003c\/li\u003e\n\u003cli\u003eOutput power 1 channel @ 1 Ω: 1000 watts\u003c\/li\u003e\n\u003cli\u003eTotal power RMS: 1000 watts\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 1 ohm\u003c\/li\u003e\n\u003cli\u003eAdjustable crossovers: yes\u003c\/li\u003e\n\u003cli\u003eInputs: Pre-In RCA\u003c\/li\u003e\n\u003cli\u003eInputs: Wired speaker inputs\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 243 x 48 x 159 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.98 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: 22–34 VDC\u003c\/li\u003e\n\u003cli\u003eFuse: 2 x 15 A\u003c\/li\u003e\n\u003cli\u003eOperating supply voltage: 14–36 VDC\u003c\/li\u003e\n\u003cli\u003eIdle current: 0.7 A\u003c\/li\u003e\n\u003cli\u003eIdle current off: 0.07 mA\u003c\/li\u003e\n\u003cli\u003eConsumption at 14.4 VDC, 2 Ω, maximum music power: 25 A\u003c\/li\u003e\n\u003cli\u003eRemote control IN: 6.5–34 VDC (1 mA)\u003c\/li\u003e\n\u003cli\u003eART automatic on\/off switching of OUTPUT BTL speakers (selectable): 2–7 VDC\u003c\/li\u003e\n\u003cli\u003eDistortion (THD) @ 1 kHz, 4 Ω, 70 percent rated power: 0.1 %\u003c\/li\u003e\n\u003cli\u003eDamping factor @ 1 kHz, 4 Ω, 2 VRMS: 140\u003c\/li\u003e\n\u003cli\u003eBandwidth @ -1.5 dB: 10 Hz – 500 Hz\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio (A-weighted @ 1 V input) master input: 110 dBA\u003c\/li\u003e\n\u003cli\u003eInput sensitivity Pre-In selectable: 0.6 \/ 2.0 \/ 6.0 VRMS\u003c\/li\u003e\n\u003cli\u003eInput sensitivity Speaker-In selectable: 2.0 \/ 6.5 \/ 20 VRMS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":44581563629835,"sku":"HMD1-24V","price":617.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/hertz-hmd1-24v-1-kanal-verstarker-masori-kaufen.webp?v=1747929240"},{"product_id":"hertz-powersport-hmp-1d-1-kanal-verstaerker","title":"Powersport HMP 1D","description":"\u003cp\u003eThe Hertz Powersport HMP 1D is a 1-Channel Amplifier with an aluminum die-cast housing and IPX64 rating. The compact format measures a maximum of 223 x 100.5 x 43.6 mm at 1.35 kg. It features a Crossover with a bridgeable crossover system, a low-pass filter at 65, 85, or 115 Hz at 12 dB\/oct., a subsonic filter at 45 Hz (Off, 22 or 32 Hz, 12 dB\/oct.), and a boost at 50 Hz (Off, +6 or +9 dB). It has balanced inputs with high suppression of electromagnetic interference and PRE IN. The bandwidth is 10–500 Hz, the signal-to-noise ratio is 105 dB, and the damping factor is 300 (100 Hz @ 4 Ohm). The distortion is 0.1% (100 Hz @ 4 Ohm), with Pre-In sensitivity LO: 0.2–5 V and HI: 0.8–20 V. Power supply is 11–15 VDC with 1 x 15 A Fuse, idle current is 1 A\/0.04 mA, remote input is 4–15 VDC (1 mA), and it features automatic remote on\/off. The HRC BM remote control for level adjustment is included.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eAluminum die-cast housing\u003c\/li\u003e\n\u003cli\u003eIPX64\u003c\/li\u003e\n\u003cli\u003eCompact design, max. size 223 x 100.5 x 43.6 mm\u003c\/li\u003e\n\u003cli\u003eWeight 1.35 kg\u003c\/li\u003e\n\u003cli\u003eIncludes HRC BM volume remote control\u003c\/li\u003e\n\u003cli\u003eBalanced inputs\u003c\/li\u003e\n\u003cli\u003eHigh suppression of electromagnetic interference\u003c\/li\u003e\n\u003cli\u003eAutomatic remote on\/off\u003c\/li\u003e\n\u003cli\u003eInputs: PRE IN\u003c\/li\u003e\n\u003cli\u003eIntegrated Crossover\u003c\/li\u003e\n\u003cli\u003eBridgeable crossover system\u003c\/li\u003e\n\u003cli\u003eFull filter: Yes\u003c\/li\u003e\n\u003cli\u003eLow-pass: 65 \/ 85 \/ 115 Hz @ 12 dB\/oct.\u003c\/li\u003e\n\u003cli\u003eSubsonic 45 Hz: Off \/ 22 \/ 32 Hz @ 12 dB\/oct.\u003c\/li\u003e\n\u003cli\u003eBoost 50 Hz: Off \/ +6 \/ +9 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 11–15 VDC\u003c\/li\u003e\n\u003cli\u003eFuse: 1 x 15 A\u003c\/li\u003e\n\u003cli\u003eIdle current On\/Off: 1 A \/ 0.04 mA\u003c\/li\u003e\n\u003cli\u003eCurrent draw @ 2 Ohm, 14.4 VDC (maximum musical power): 15 A\u003c\/li\u003e\n\u003cli\u003eRemote input: 4–15 VDC, 1 mA\u003c\/li\u003e\n\u003cli\u003eDistortion (100 Hz @ 4 Ohm): 0.1%\u003c\/li\u003e\n\u003cli\u003eBandwidth: 10–500 Hz\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio (A-weighted @ 1 V): 105 dB\u003c\/li\u003e\n\u003cli\u003eDamping factor (100 Hz @ 4 Ohm): 300\u003c\/li\u003e\n\u003cli\u003ePre-In sensitivity LO: 0.2–5 V\u003c\/li\u003e\n\u003cli\u003ePre-In sensitivity HI: 0.8–20 V\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 2 Ohm\u003c\/li\u003e\n\u003cli\u003eOutput power RMS @ 14.4 VDC, THD 1%: 150 W x 1 (4 Ohm)\u003c\/li\u003e\n\u003cli\u003eOutput power RMS @ 14.4 VDC, THD 1%: 250 W x 1 (2 Ohm)\u003c\/li\u003e\n\u003cli\u003eOutput power RMS @ 14.4 VDC, THD 10%: 180 W x 1 (4 Ohm)\u003c\/li\u003e\n\u003cli\u003eOutput power RMS @ 14.4 VDC, THD 10%: 300 W x 1 (2 Ohm)\u003c\/li\u003e\n\u003cli\u003eTotal output power RMS: 300 W\u003c\/li\u003e\n\u003cli\u003eMax dimensions: 223 x 100.5 x 43.6 mm\u003c\/li\u003e\n\u003cli\u003eDimension A: 223 mm\u003c\/li\u003e\n\u003cli\u003eDimension B: 207 mm\u003c\/li\u003e\n\u003cli\u003eDimension C: 100.5 mm\u003c\/li\u003e\n\u003cli\u003eDimension D: 76 mm\u003c\/li\u003e\n\u003cli\u003eDimension E: 43.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":44581579424011,"sku":"HMP-1D","price":221.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/hertz-powersport-hmp-1d-1-kanal-verstarker-masori-kaufen.webp?v=1747929242"},{"product_id":"dd-audio-sx1000-1-kanal-verstaerker","title":"SX1000","description":"\u003cp\u003eThe SX1000 is a 1-Channel Amplifier from DD Audio with a heavy DD aluminum housing, as well as end plates and a base plate made of aluminum. It features high-level inputs, 12 dB\/oct. high-pass\/low-pass transitions, and screwable power and speaker connections. Remote control of the gain is available, and the remote control is included in the package. The power output is 1000 Watts RMS at 1 Ohm and 600 Watts RMS at 2 Ohms. The frequency response ranges from 10–205 Hz, subsonic 30–100 Hz, and the low-pass filter covers 50–20000 Hz. The power connections are designed for 25 mm², and the speaker wire gauge is for 4 mm². The operating voltage is 9–16 V, with a maximum current draw of 100 A. The sensitivity of the RCA and high-level input voltage is 8–0.4 V, the signal-to-noise ratio (RCA) is 85 dB, and the total harmonic distortion is 0.1%. The dimensions are 178 x 115 x 50 mm.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eHeavy DD aluminum housing\u003c\/li\u003e\n\u003cli\u003eEnd plates and base plate made of aluminum\u003c\/li\u003e\n\u003cli\u003eHigh-level inputs\u003c\/li\u003e\n\u003cli\u003e12 dB\/oct. high-pass\/low-pass transitions\u003c\/li\u003e\n\u003cli\u003eScrewable power and speaker connections\u003c\/li\u003e\n\u003cli\u003eRemote control of the gain\u003c\/li\u003e\n\u003cli\u003e25 mm² power connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9–16 V\u003c\/li\u003e\n\u003cli\u003ePower RMS @ 2 Ohm: 600 Watts\u003c\/li\u003e\n\u003cli\u003ePower RMS @ 1 Ohm: 1000 Watts\u003c\/li\u003e\n\u003cli\u003eMaximum current draw: 100 A\u003c\/li\u003e\n\u003cli\u003eSensitivity of RCA input voltage: 8–0.4 V\u003c\/li\u003e\n\u003cli\u003eSensitivity of high-level input voltage: 8–0.4 V\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio (RCA): 85 dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: 0.1%\u003c\/li\u003e\n\u003cli\u003eBass boost: 12 dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10–205 Hz\u003c\/li\u003e\n\u003cli\u003eSubsonic: 30–100 Hz\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 50–20000 Hz\u003c\/li\u003e\n\u003cli\u003eRemote control included\u003c\/li\u003e\n\u003cli\u003eSpeaker wire gauge: 4 mm²\u003c\/li\u003e\n\u003cli\u003eDimensions: 178 x 115 x 50 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DD Audio","offers":[{"title":"Default Title","offer_id":44943384281355,"sku":"SX1000","price":349.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/dd-audio-sx1000-1-kanal-verstarker-masori-kaufen.webp?v=1747951613"},{"product_id":"ampire-mbm1-24v-4g-1-kanal-verstaerker","title":"MBM1.24V-4G","description":"\u003cp\u003eExperience the high-end 1-channel amplifier MBM1.24V-4G from Ampire, specifically designed for your truck, bus, or boat in the 24-volt operating voltage range. Precisely and efficiently, it delivers excellent sound with 500 watts RMS and an impressive 1000 watts maximum output power. This mono digital amplifier is characterized not only by its ultra-compact design but also by useful features such as RCA inputs and speaker inputs with auto-turn-on function. An additional feature is the illuminated Ampire logo, which gives the amplifier a modern and distinctive look.\u003c\/p\u003e\n \n \u003cstrong\u003eFeatures\u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003eMono digital amplifier for 24 volt operating voltage in truck, bus or boat\u003c\/li\u003e\n \u003cli\u003eUltracompact design\u003c\/li\u003e\n \u003cli\u003eCinch inputs\u003c\/li\u003e\n \u003cli\u003eSpeaker inputs with auto turn-on function\u003c\/li\u003e\n \u003cli\u003e500 Watt RMS\/1000 Watt max.\u003c\/li\u003e\n \u003cli\u003eIlluminated AMPIRE Logo\u003c\/li\u003e\n \u003c\/ul\u003e\n \n \u003cstrong\u003epower supply\u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003eOperating voltage: 20-32 Volt DC\u003c\/li\u003e\n \u003cli\u003eRemote voltage: 8-28 Volt DC\u003c\/li\u003e\n \u003cli\u003eStandby current: 0.86A\u003c\/li\u003e\n \u003cli\u003eStandby current when switched off: \u003c0.0004A\u003c\/li\u003e\n \u003cli\u003eFuse: 25A x 2\u003c\/li\u003e\n \u003c\/ul\u003e\n \n \u003cstrong\u003efinal stage\u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003eOutput power (RMS) @ 28.8V \/ 4 Ohm: 300 Watts x 1\u003c\/li\u003e\n \u003cli\u003eOutput power (RMS) @ 28.8V \/ 2 Ohm: 500 Watts x 1\u003c\/li\u003e\n \u003cli\u003eOutput power (max.) @ 28.8V \/ 4 Ohm: 600 Watts x 1\u003c\/li\u003e\n \u003cli\u003eOutput power (max.) @ 28.8V \/ 2 Ohm: 1000 Watts x 1\u003c\/li\u003e\n \u003cli\u003eClarity factor: \u003c0.5%\u003c\/li\u003e\n \u003cli\u003eSignal-to-noise ratio: \u003e85dB\u003c\/li\u003e\n \u003cli\u003eInput sensitivity: 200mV - 6.0V\u003c\/li\u003e\n \u003c\/ul\u003e\n \n \u003cstrong\u003eactive switch\u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003eLow-pass filter: 30Hz-250Hz\u003c\/li\u003e\n \u003cli\u003eSlope: 12dB\u003c\/li\u003e\n \u003cli\u003eBass Boost Gain: 0-12dB\u003c\/li\u003e\n \u003cli\u003eBass Boost Frequency: 40-100Hz variable\u003c\/li\u003e\n \u003cli\u003eSubsonic filter: 20Hz\/24dB\u003c\/li\u003e\n \u003c\/ul\u003e\n \n \u003cstrong\u003eMiscellaneous\u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003eDimensions (LxWxH): 251 x 141 x 50mm\u003c\/li\u003e\n \u003cli\u003eWeight: 1.90Kg\u003c\/li\u003e\n \u003cli\u003eInputs: 2x RCA, 2x Speaker (High Level Auto Turn On for radios with BTL amplifiers)\u003c\/li\u003e\n \u003c\/ul\u003e\n \n \u003cstrong\u003eCable cross-section of the connection terminals\u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003ePower supply up to 35mm²\u003c\/li\u003e\n \u003cli\u003eSpeakers up to 10mm²\u003c\/li\u003e\n \u003c\/ul\u003e","brand":"Ampire","offers":[{"title":"Default Title","offer_id":45160062550283,"sku":"MBM1.24V-4G","price":189.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/ampire-mbm1_24v-4g-1-kanal-verstarker-masori-kaufen.webp?v=1747954699"},{"product_id":"audio-system-r-1250-1-d-24v-1-kanal-verstaerker","title":"R-1250.1 D 24V","description":"\u003cp\u003eThe Audio System R-1250.1 D 24V is a 1-Channel Amplifier with an operating voltage of 20 to 28 V. The output power is specified at 24 V and 3% THD. RMS power is 1 x 500 W at 4 Ohm Mono, 1 x 900 W at 2 Ohm Mono, and 1 x 1250 W at 1 Ohm Mono. The signal-to-noise ratio is over 96 dB. A low-pass filter from 30 to 150 Hz and a subsonic filter from 10 to 50 Hz are integrated. The transmission frequency ranges from 10 to 150 Hz (+\/- 3 dB), and the distortion factor at 4 Ohm at half nominal power is less than 0.061%. The input sensitivity is 300 mV to 8 V (+\/- 5%), and it is protected with 3 x 40 A. The dimensions are 185 mm width, 50 mm height, and 380 mm length.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 20–28 V\u003c\/li\u003e\n\u003cli\u003eRMS power @ 4 Ohm Mono: 1 x 500 W\u003c\/li\u003e\n\u003cli\u003eRMS power @ 2 Ohm Mono: 1 x 900 W\u003c\/li\u003e\n\u003cli\u003eRMS power @ 1 Ohm Mono: 1 x 1250 W\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: \u0026gt; 96 dB\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 30–150 Hz\u003c\/li\u003e\n\u003cli\u003eSubsonic Filter: 10–50 Hz\u003c\/li\u003e\n\u003cli\u003eFuse: 3 x 40 A\u003c\/li\u003e\n\u003cli\u003eDimensions: 185 mm (W) x 50 mm (H) x 380 mm (L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eOutput power: at 24 V \/ 3% THD\u003c\/li\u003e\n\u003cli\u003eTransmission frequency: 10–150 Hz (+\/- 3 dB)\u003c\/li\u003e\n\u003cli\u003eDistortion factor at 4 Ohm at 1\/2 nominal power: \u0026lt; 0.061 %\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 300 mV – 8 V (+\/- 5 %)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio System","offers":[{"title":"Default Title","offer_id":45163009999115,"sku":"R-1250.1 D-24V","price":425.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/audio-system-r-1250_1-d-24v-1-kanal-verstarker-masori-kaufen.jpg?v=1782935744"},{"product_id":"gladen-mosconi-pico-1-1-kanal-verstaerker","title":"Mosconi PICO 1","description":"\u003cp\u003eThe Mosconi PICO 1 is a 1-Channel Amplifier from Gladen with full-range PWM amplification technology. The output power is 1 x 750 Watts RMS at 2 Ohms and 1 x 500 Watts at 4 Ohms. The circuit uses a separate, synchronized modulation and fast high-current MOSFETs. High-level and low-level inputs as well as dedicated filters are available. An auto-on feature in high-level operation (SE or BTL mode), the option for remote volume control, and Molex connectors are integrated. A low-pass filter from 45 to 310 Hz (12 dB\/Oct) and a subsonic filter at 13 Hz (12 dB\/Oct) are included.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eFull-range PWM amplification technology\u003c\/li\u003e\n\u003cli\u003eSeparate, synchronized modulation\u003c\/li\u003e\n\u003cli\u003eFast high-current MOSFETs\u003c\/li\u003e\n\u003cli\u003eHigh-level and low-level inputs\u003c\/li\u003e\n\u003cli\u003eDedicated filters\u003c\/li\u003e\n\u003cli\u003eAuto-on feature (only high level, SE or BTL mode)\u003c\/li\u003e\n\u003cli\u003eRemote volume control (optional)\u003c\/li\u003e\n\u003cli\u003eMolex connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eOutput power at 4 Ohms: 1 x 500 Watts\u003c\/li\u003e\n\u003cli\u003eOutput power at 2 Ohms: 1 x 750 Watts RMS\u003c\/li\u003e\n\u003cli\u003eInput voltage (signal): 0.3 V to 20 V\u003c\/li\u003e\n\u003cli\u003eEfficiency: \u003e 75 %\u003c\/li\u003e\n\u003cli\u003eAuto-On (only high level): Off to BTL\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: Off or 45 to 310 Hz (12 dB\/Oct)\u003c\/li\u003e\n\u003cli\u003eSubsonic filter (always on): 13 Hz (12 dB\/Oct)\u003c\/li\u003e\n\u003cli\u003eDimensions: 150 x 115 x 46 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1050 grams\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gladen","offers":[{"title":"12V","offer_id":45290622419211,"sku":"PICO-1-12V","price":474.05,"currency_code":"EUR","in_stock":true},{"title":"18V","offer_id":45290622451979,"sku":"PICO-1-18V","price":474.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/gladen-mosconi-pico-1-1-kanal-verstarker-masori-kaufen.jpg?v=1782936301"},{"product_id":"gladen-mosconi-atomo-1-1-kanal-verstaerker","title":"Mosconi ATOMO 1","description":"\u003cp\u003eThe Mosconi ATOMO 1 is a 1-Channel Amplifier from Gladen in a compact format measuring 86 x 65 x 34 mm and weighing 280 g, with a black anodized surface. Output power is 1 x 205 W RMS at 4 Ohm (250 W @ 16 V) and 1 x 350 W RMS at 2 Ohm, with a minimum load of 2 Ohm using a music signal. Input range is 0.4–5 Vrms (Low-Level) and 1.6–20 Vrms (High-Level). Inputs are flexibly configurable (floating\/fixed ground, switchable load resistors) and remote detection in BTL mode. Onboard filter can be set to OFF or Lowpass with 12 dB\/Oct and 80 Hz. Power supply is 10–16 V, unregulated push-pull DC-DC converter, fuse rating 1 x 20 A, efficiency \u003e 75 %, thermal shutdown at 93 °C. Start\u0026Stop compatible and available in 12V and 24V versions. Low\/High Level inputs via Micro-Fit, speaker output and power connection via Mini-Fit.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eExtremely compact design\u003c\/li\u003e\n\u003cli\u003e12V and 24V versions\u003c\/li\u003e\n\u003cli\u003eRemote detection (BTL)\u003c\/li\u003e\n\u003cli\u003eHigh-pass \/ Low-pass filter\u003c\/li\u003e\n\u003cli\u003eInputs flexibly configurable (floating \/ fixed ground, switchable load resistors)\u003c\/li\u003e\n\u003cli\u003eStart\u0026Stop compatible: Yes\u003c\/li\u003e\n\u003cli\u003eLow\/High Level input: Micro-Fit\u003c\/li\u003e\n\u003cli\u003eSpeaker output: Mini-Fit\u003c\/li\u003e\n\u003cli\u003ePower connection: Mini-Fit\u003c\/li\u003e\n\u003cli\u003eDimensions: 86 x 65 x 34 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 280 g\u003c\/li\u003e\n\u003cli\u003eCase surface: Black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eInput voltage: 10–16 V\u003c\/li\u003e\n\u003cli\u003eDC-DC converter topology: Unregulated – Push Pull\u003c\/li\u003e\n\u003cli\u003eFuse rating: 1 x 20 A\u003c\/li\u003e\n\u003cli\u003eTurn-on\/Turn-off voltage threshold: 9 V \/ 6 V\u003c\/li\u003e\n\u003cli\u003eMute delay: 3 seconds\u003c\/li\u003e\n\u003cli\u003eTurn-on automatic (only High Level): Only BTL source\u003c\/li\u003e\n\u003cli\u003eOverall efficiency: \u003e 75 %\u003c\/li\u003e\n\u003cli\u003eQuiescent current: \u003c 0.1 mA\u003c\/li\u003e\n\u003cli\u003eNo-load current: 0.45 A @ 14.4 V\u003c\/li\u003e\n\u003cli\u003eThermal shutdown threshold: 93 °C (± 5 %)\u003c\/li\u003e\n\u003cli\u003eOutput power RMS @ 4 Ohm: 1 x 205 W (250 W @ 16 V)\u003c\/li\u003e\n\u003cli\u003eOutput power RMS @ 2 Ohm: 1 x 350 W\u003c\/li\u003e\n\u003cli\u003eT.H.D. @ 4 Ohm: \u003c 0.08 % (1 kHz \/ 90 Power rating ref)\u003c\/li\u003e\n\u003cli\u003eT.H.D. @ 2 Ohm: \u003c 0.1 % (1 kHz \/ 90 Power rating ref)\u003c\/li\u003e\n\u003cli\u003eMinimum load: 2 Ohm with a music signal\u003c\/li\u003e\n\u003cli\u003eLow-Level input sensitivity range: 0.26–0.7 Vrms\u003c\/li\u003e\n\u003cli\u003eHigh-Level input sensitivity range: 1.3–3.5 Vrms\u003c\/li\u003e\n\u003cli\u003eExtended input voltage range (Low-Level): 0.4–5 Vrms\u003c\/li\u003e\n\u003cli\u003eExtended input voltage range (High-Level): 1.6–20 Vrms\u003c\/li\u003e\n\u003cli\u003eBandwidth (-3 dB – 10 W): 5 Hz – 35 kHz\u003c\/li\u003e\n\u003cli\u003eLow-Level input impedance: \u003e 15 kOhm\u003c\/li\u003e\n\u003cli\u003eHigh-Level input impedance: 21 Ohm (Dummy load with jumper)\u003c\/li\u003e\n\u003cli\u003eGround reference (only Low Level): Open – 21 Ohm\u003c\/li\u003e\n\u003cli\u003eOnboard filter configuration: OFF – LP\u003c\/li\u003e\n\u003cli\u003eSlope of the onboard filter: 12 dB\/Oct\u003c\/li\u003e\n\u003cli\u003eCut-off frequency of the onboard filter: 80 Hz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gladen","offers":[{"title":"12V","offer_id":45290992763147,"sku":"ATOMO-1-12V","price":228.57,"currency_code":"EUR","in_stock":true},{"title":"24V","offer_id":45290992795915,"sku":"ATOMO-1-24V","price":265.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/gladen-mosconi-atomo-1-1-kanal-verstarker-masori-kaufen.jpg?v=1782936327"},{"product_id":"hertz-dp-1-500-1-kanal-verstaerker","title":"DP 1.500","description":"\u003cp\u003eDP 1.500 is a 1-Channel Amplifier from Hertz featuring Advanced Class-D technology. The compact design includes a status LED, a removable top plate, and a solid machined terminal block. A balanced input circuit as well as Pre-In and Speaker-In are available. Adjustable input levels, a low-pass filter from 50 - 250 Hz with 24 dB\/Oct., and a subsonic filter at 25 Hz with 24 dB\/Oct. are integrated. The phase is switchable between 0\/180°, bass boost at 50 Hz is selectable from 0 - 9 dB, and the SUB Remote Volume Control HRC 02 adjusts from -20 - 6 dB. The minimum load impedance is 2 Ω, and the maximum output power is 590 W. Other specifications include an efficiency of 86%, a bandwidth of 10 Hz - 500 Hz, a signal-to-noise ratio of 99 dBA, and a damping factor of 180.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eAdvanced Class-D technology\u003c\/li\u003e\n\u003cli\u003eCompact design\u003c\/li\u003e\n\u003cli\u003eStatus LED\u003c\/li\u003e\n\u003cli\u003eRemovable top plate\u003c\/li\u003e\n\u003cli\u003eSolid machined terminal block\u003c\/li\u003e\n\u003cli\u003eBalanced input circuit\u003c\/li\u003e\n\u003cli\u003ePre-In and Speaker-In\u003c\/li\u003e\n\u003cli\u003eFull-range preamplifier output\u003c\/li\u003e\n\u003cli\u003eAdjustable input levels\u003c\/li\u003e\n\u003cli\u003eAdjustable crossovers\u003c\/li\u003e\n\u003cli\u003eLow-pass OFF \/ 50 - 250 Hz 24 dB\/Oct.\u003c\/li\u003e\n\u003cli\u003eSubsonic OFF \/ 25 Hz 24 dB\/Oct.\u003c\/li\u003e\n\u003cli\u003ePhase 0 \/ 180°\u003c\/li\u003e\n\u003cli\u003eBass Boost at 50 Hz 0 - 9 dB\u003c\/li\u003e\n\u003cli\u003eSUB Remote Volume Control HRC 02 -20 - 6 dB\u003c\/li\u003e\n\u003cli\u003eART automatic on\/off via SPK-IN 1.5 VDC\u003c\/li\u003e\n\u003cli\u003eAmplifier Class D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 2 Ω\u003c\/li\u003e\n\u003cli\u003eNominal supply voltage fuse: 11 - 15 VDC (1 x 30 A)\u003c\/li\u003e\n\u003cli\u003eOperating supply voltage: 6.5 - 17.5 VDC\u003c\/li\u003e\n\u003cli\u003eNo-load current: 1 A\u003c\/li\u003e\n\u003cli\u003eStandby current consumption: 50 µA\u003c\/li\u003e\n\u003cli\u003eCurrent consumption at minimum load impedance maximum music power: 21 A\u003c\/li\u003e\n\u003cli\u003eRemote IN: 4 - 17 VDC (1 mA)\u003c\/li\u003e\n\u003cli\u003eEfficiency: 86 %\u003c\/li\u003e\n\u003cli\u003eTHD distortion at 100 Hz, 70 % nominal power: 0.2 %\u003c\/li\u003e\n\u003cli\u003eDamping factor at 1 kHz, 1 W: 180\u003c\/li\u003e\n\u003cli\u003eBandwidth at -3 dB: 10 Hz - 500 Hz\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio A-weighted at 1 V input: 99 dBA\u003c\/li\u003e\n\u003cli\u003ePre-In sensitivity: 0.32 - 8 VRMS\u003c\/li\u003e\n\u003cli\u003eSpeaker-In sensitivity: 1.6 - 40 VRMS\u003c\/li\u003e\n\u003cli\u003eRMS output power at 1 % THD, 1 channel at 4 Ω: 280 W\u003c\/li\u003e\n\u003cli\u003eRMS output power at 1 % THD, 1 channel at 2 Ω: 500 W\u003c\/li\u003e\n\u003cli\u003eRMS output power at 14.4 VDC and 10 % THD, 1 channel at 4 Ω: 350 W\u003c\/li\u003e\n\u003cli\u003eRMS output power at 14.4 VDC and 10 % THD, 1 channel at 2 Ω: 590 W\u003c\/li\u003e\n\u003cli\u003eTotal power: 590 W\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45920602685707,"sku":"DP-1.500","price":159.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/hertz-dp-1_500-1-kanal-verstarker-masori-kaufen.jpg?v=1747975080"},{"product_id":"cerwin-vega-cvpro3k-1-kanal-verstaerker","title":"CVPRO3K","description":"\u003cp\u003eThe CVPRO3K from Cerwin Vega is a 1-Channel Monoblock Car Amplifier of Class D. The device achieves a rated power of 1100 Watts RMS at 4 Ohms, 2050 Watts RMS at 2 Ohms, and 3000 Watts RMS at 1 Ohm. A wired bass remote control is included and allows for variable bass boost from 0 to +12 dB at 50 Hz. The amplifier is designed for mono-channel operation. The integrated speaker level inputs feature automatic signal detection for power on. The dimensions of the housing are 225 mm in width, 202 mm in length, and 66 mm in height.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eCVP Pro Monoblock Car Amplifier\u003c\/li\u003e\n\u003cli\u003eClass D circuit design\u003c\/li\u003e\n\u003cli\u003eRated power at 4 Ohms: 1100 Watts x 1 Channel\u003c\/li\u003e\n\u003cli\u003eRated power at 2 Ohms: 2050 Watts x 1 Channel\u003c\/li\u003e\n\u003cli\u003eRated power at 1 Ohm: 3000 Watts x 1 Channel\u003c\/li\u003e\n\u003cli\u003eIncludes wired bass remote control\u003c\/li\u003e\n\u003cli\u003eVariable bass boost: 0 to +12 dB at 50 Hz\u003c\/li\u003e\n\u003cli\u003eMono-channel operation\u003c\/li\u003e\n\u003cli\u003eSpeaker level inputs with automatic signal detection\u003c\/li\u003e\n\u003cli\u003eDimensions: 225 mm W x 202 mm L x 66 mm H\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":46114055160075,"sku":"CVPRO3K","price":459.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/cerwin-vega-cvpro3k-1-kanal-verstarker-masori-kaufen.jpg?v=1781876296"},{"product_id":"cerwin-vega-rpm-stroker-srpm750-1d-1-kanal-verstaerker","title":"RPM Stroker SRPM750.1D","description":"\u003cp\u003eThe RPM Stroker SRPM750.1D from Cerwin Vega is a 1-Channel Class D Full-Range Amplifier. The device features a conformally coated circuit board for protection against dust, vibrations, and moisture, as well as a high-performance aluminum alloy heat sink. The controls located on the top allow adjustments to the variable low-pass filter, the subsonic filter, and the variable bass boost. A Bluetooth controller port for the Cerwin Vega CVBTR10 Marine Bluetooth Controller is integrated. The amplifier operates with a pulse-width modulated MOSFET power supply and offers a 3-way protection circuit against overheating, overload, and short circuit. The housing is black and has compact dimensions.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel Amplifier\u003c\/li\u003e\n\u003cli\u003eClass D Full-Range Amplifier\u003c\/li\u003e\n\u003cli\u003eRated power at 4 Ohms: 300 Watts RMS\u003c\/li\u003e\n\u003cli\u003eRated power at 2 Ohms: 500 Watts RMS\u003c\/li\u003e\n\u003cli\u003eRated power at 1 Ohm: 750 Watts RMS\u003c\/li\u003e\n\u003cli\u003eTotal output power: 750 Watts RMS\u003c\/li\u003e\n\u003cli\u003eConformally coated circuit board\u003c\/li\u003e\n\u003cli\u003eHigh-performance aluminum alloy heat sink\u003c\/li\u003e\n\u003cli\u003eBluetooth controller port\u003c\/li\u003e\n\u003cli\u003ePulse-width modulated MOSFET power supply\u003c\/li\u003e\n\u003cli\u003eLED operation indicator (green) and protection indicator (red)\u003c\/li\u003e\n\u003cli\u003eSoft start and mono-channel operation\u003c\/li\u003e\n\u003cli\u003eSpeaker level inputs (high level)\u003c\/li\u003e\n\u003cli\u003ePreamp RCA outputs\u003c\/li\u003e\n\u003cli\u003eTwo speaker connections\u003c\/li\u003e\n\u003cli\u003eDimensions: 134 mm W x 220 mm L x 44 mm H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency response: 10 - 33,000 Hz\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): 0.05 %\u003c\/li\u003e\n\u003cli\u003eVariable low-pass filter: 30–300 Hz, 24 dB\/Octave\u003c\/li\u003e\n\u003cli\u003eSubsonic filter: 10–55 Hz, 24 dB\/Octave\u003c\/li\u003e\n\u003cli\u003eVariable bass boost: 0 to +12 dB at 50 Hz\u003c\/li\u003e\n\u003cli\u003eInput sensitivity low level: 0.2 mV - 10 V\u003c\/li\u003e\n\u003cli\u003eInput sensitivity high level: Up to 25 Watts RMS\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":46114059845899,"sku":"SRPM750.1D","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/cerwin-vega-rpm-stroker-srpm750_1d-1-kanal-verstarker-masori-kaufen.jpg?v=1781876297"}],"url":"https:\/\/masprori.com\/en\/collections\/marine-1-channel-car-amplifier-boat.oembed","provider":"Masori | Shop","version":"1.0","type":"link"}