{"title":"CS-Batteries lithium batteries for cars","description":"\u003ch2\u003eBuy CS Batteries Cheap Online – Your Car Audio Online Shop Masori\u003c\/h2\u003e\n\u003cp\u003eIn our car audio online store Masori, you will find a wide selection of CS batteries specifically designed for car audio applications and mobile energy storage. The LiFePO4 technology (lithium iron phosphate) provides high power reserves for subwoofer-strong car sound systems. Thanks to advanced design, these batteries are characterized by low weight and a compact form factor. For hybrid installations or large amplifier setups, the powerful 12V series is ideal for achieving outstanding sound quality.\u003c\/p\u003e\n\u003ch3\u003eBasic Characteristics and Types of LiFePO4 Batteries\u003c\/h3\u003e\n\u003cp\u003eCS-Batteries offers different capacities and designs to support every car audio requirement. Depending on the variant, nominal voltages between 12.0 V and 12.8 V are available. Capacities range from 15 Ah to 300 Ah, allowing you to choose a suitable battery depending on the power requirement. These batteries operate with very low internal impedance, which is especially important for power-oriented applications such as car audio subwoofer configurations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 10.0 – 14.6 V\u003c\/li\u003e\n\u003cli\u003eLifecycles: Up to 3000 cycles at 100% depth of discharge\u003c\/li\u003e\n\u003cli\u003eMaximal discharge rate: Up to 3C (depending on the model)\u003c\/li\u003e\n\u003cli\u003eRecommended charging method: CC\/CV (Constant Current\/Constant Voltage)\u003c\/li\u003e\n\u003cli\u003eConnection: M6 or M8 threaded bolts, partly plug-and-play capable connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe designs differ in terms of size, weight, and connection technology. Compact models fit perfectly in vehicles such as VW, BMW, or SEAT, while larger capacities are used in Mercedes or Opel for demanding car audio upgrades.\u003c\/p\u003e\n\u003ch3\u003eEfficient accessories and installation options for in-car installation\u003c\/h3\u003e\n\u003cp\u003eWhen installing a CS battery in a car, it is important to use suitable accessories and ensure a secure installation situation. Ideally, you should use special brackets or battery holders designed for LiFePO4. Tight-fitting mounting brackets provide stability to minimize vibrations and mechanical stress. Appropriately sized cable cross-sections are required for connection to amplifiers or DSP modules to reduce voltage losses.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible OFC cables in 25 mm² or more for high current applications\u003c\/li\u003e\n\u003cli\u003eSpecial fuse holders such as ANL or Mega-Fuse for short-circuit protection\u003c\/li\u003e\n\u003cli\u003eCable lugs with robust ring terminal design for good contact\u003c\/li\u003e\n\u003cli\u003eOptional battery monitor for monitoring voltage and current values\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThose who do not want to install it themselves can use our professional service. The Masori team offers an installation service in Frankfurt Oder (\u003ca href=\"https:\/\/masprori.com\/pages\/einbauservice\"\u003ehttps:\/\/masprori.com\/pages\/einbauservice\u003c\/a\u003e) for professional installation.\u003c\/p\u003e\n\u003ch3\u003eUseful Chargers and Design for High Current Loads\u003c\/h3\u003e\n\u003cp\u003eThe CS Batteries LiFePO4 batteries require specific chargers for optimal charging, which provide voltage- and current-controlled phases. Typically, a constant current phase is used for rapid energy intake, followed by a constant voltage phase to balance high final currents. Charging currents can be up to 50 A, depending on the battery capacity. Included LED indicators or LCD displays show the current charging status.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCharging phases\u003c\/th\u003e\n\u003cth\u003eCharging current (A)\u003c\/th\u003e\n\u003cth\u003eRecommended Voltage (V)\u003c\/th\u003e\n\u003cth\u003eSuitable capacities (Ah)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstant current\u003c\/td\u003e\n\u003ctd\u003e10 – 30 A\u003c\/td\u003e\n\u003ctd\u003e12.8 – 14.6 V\u003c\/td\u003e\n\u003ctd\u003e15 – 100 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstant voltage\u003c\/td\u003e\n\u003ctd\u003eUp to 50 A (short-term)\u003c\/td\u003e\n\u003ctd\u003e14.6 V\u003c\/td\u003e\n\u003ctd\u003e100 – 300 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor plug \u0026amp; play solutions in Audi, VW, BMW, or other vehicle manufacturers, it is important that the charger is equipped with a digital battery management system tailored to LiFePO4 technology. This prevents exceeding temperature or current limits.\u003c\/p\u003e\n\u003ch3\u003eSpectrum of Application Areas and System Integration in the Vehicle\u003c\/h3\u003e\n\u003cp\u003eCS batteries are convincing not only in classic car audio setups but also in motorhomes, boats, or accumulator-based camper electronics. Those who need powerful auxiliary electronics for DSP amplifiers, digital sound processors, or high-power amplifiers will benefit from the high discharge currents. Due to their low self-discharge, the LiFePO4 batteries are also suitable for seasonal use, such as in show cars or weekend vehicles, without the need for constant recharging.\u003c\/p\u003e\n\u003cp\u003eIf needed, you can contact our expert support directly (\u003ca href=\"https:\/\/masprori.com\/pages\/faq-und-hilfe\"\u003ehttps:\/\/masprori.com\/pages\/faq-und-hilfe\u003c\/a\u003e) or consult the interactive AI chatbot to ensure that the selected components are compatible with your car. In addition to the voltage specifications, individual requirements such as installation locations, pole arrangement, and cable routing are also taken into account there.\u003c\/p\u003e\n\u003ch3\u003ePractical notes on installation steps and acoustic optimization\u003c\/h3\u003e\n\u003cp\u003eTo ensure your car audio system unleashes the full power of the CS batteries, you should consider a few installation aspects. Thoughtful placement in a well-ventilated area in the trunk or under the rear seat reduces unwanted heat buildup. Check that the battery is securely fastened and protected against shocks. Especially with low-frequency subwoofers, a stable power supply is crucial to handle load peaks without voltage drops.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDecoupling measures with rubber inserts against vibrations\u003c\/li\u003e\n\u003cli\u003eHigh-quality mass connections on the body or battery negative terminal\u003c\/li\u003e\n\u003cli\u003eShort cable runs to amplifiers or DSPs for low voltage loss\u003c\/li\u003e\n\u003cli\u003eObservance of correct polarity when connecting to the charge controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor deep frequencies and powerful kick basses, a combination of CS batteries and powerful Class-D amplifiers is recommended to ensure optimal headroom for your car audio system.\u003c\/p\u003e\n\u003ch3\u003eVariability of technical data for every sound enthusiast\u003c\/h3\u003e\n\u003cp\u003eThe LiFePO4 series from CS-Batteries is available in a variety of technical versions. Those planning only a subtly upgraded audio system expansion can start with 20 Ah to 50 Ah. For complex multi-channel configurations with multiple amplifiers, however, a capacity of 80 Ah or higher is recommended. A low ESR (Equivalent Series Resistance) enables rapid current draws – this is especially essential for kick bass and powerful subwoofer passages. With a constant discharge power of up to 200 A in the larger series models, multiple amplifiers remain stably supplied at all times.\u003c\/p\u003e\n\u003cp\u003eIn addition, the temperature tolerance of the CS batteries is adapted to various climate conditions. At very cold temperatures, it is advisable to use a thermal management system to protect the battery from excessive cooling. To ensure safe charging in the car even under extreme summer conditions, many variants are equipped with integrated BMS modules.\u003c\/p\u003e\n\u003ch3\u003eProfessional advice and service for car hi-fi and auto hi-fi\u003c\/h3\u003e\n\u003cp\u003eIf you are unsure which CS batteries are best suited for your project, you can use our extensive support. Through our \u003ca href=\"https:\/\/masprori.com\/pages\/faq-und-hilfe\"\u003eExpert Support\u003c\/a\u003e You will receive detailed information about suitable charging curves, battery capacities, and cable concepts. At the same time, you can use the AI chatbot to determine which systems are compatible with your Audi or VW car. In addition to batteries, Masori offers other components from CS-Batteries, including special charger series with active protection functions. Those planning individual sound projects can consult our experts to ensure optimal interaction of all car audio components.\u003c\/p\u003e\n\u003cp\u003eWhether you're aiming for a complete car audio upgrade or an addition to your existing system – in our range, you'll find the right CS Batteries model. Thanks to advanced LiFePO4 technology and powerful charging systems, not only does the power of your audio system increase, but you also benefit from a longer runtime per charge. Browse our Masori car audio online shop and discover high-quality accessories, amplifiers, speakers, and much more to equip your car with excellent sound.\u003c\/p\u003e","products":[{"product_id":"cs-batteries-hdx-40-12ah-lifepo4-lithium-lifepo4","title":"HDX-40 - 12Ah LiFePO4","description":"\u003cp\u003eThe CS-Batteries HDX-40 - 12Ah LiFePO4 is a Lithium - LiFePO4 Battery with a capacity of 12Ah and a typical nominal voltage of 13.2V. The energy is 153.6Wh, and the starting power is 1000A (CA). A complete battery management system with Dynamic-BMS and full protection, as well as the Re-START emergency start function, are integrated. The housing measures L175 x B87 x H142.5 mm and weighs 1950g. The connection is made via Multi-Connect M6 on the top, side, and front; on the top, there are 4x M6 screw connections with ring terminals (2x negative, 2x positive) available. IP66 waterproofing, low self-discharge, a charging cutoff voltage of 14.6V, and a temperature operating range of -20°C to +60°C are present. The maximum discharge cutoff voltage is 10V; the external charging current is up to 12A (1C, ~60 min), and the charging current from the alternator is up to 760W. In terms of capacity, it corresponds to a lead battery Pb-EQ with 26–40Ah.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eLithium - LiFePO4\u003c\/li\u003e\n\u003cli\u003eCapacity: 12Ah\u003c\/li\u003e\n\u003cli\u003eTypical nominal voltage: 13.2V\u003c\/li\u003e\n\u003cli\u003eStarting power: 1000A (CA)\u003c\/li\u003e\n\u003cli\u003eEnergy: 153.6Wh\u003c\/li\u003e\n\u003cli\u003eDynamic-BMS with full protection\u003c\/li\u003e\n\u003cli\u003eRe-START emergency start function\u003c\/li\u003e\n\u003cli\u003eMulti-Connect connection M6 (top, side, front)\u003c\/li\u003e\n\u003cli\u003e4x M6 screw connections on top (2x negative, 2x positive) with ring terminals\u003c\/li\u003e\n\u003cli\u003eIP66 waterproof\u003c\/li\u003e\n\u003cli\u003eLow self-discharge\u003c\/li\u003e\n\u003cli\u003eDimensions: L175 x B87 x H142.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1950g\u003c\/li\u003e\n\u003cli\u003eCapacity relevant: Pb-EQ 26–40Ah\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eType: LiFePO4 motorcycle starter battery and car audio supply battery\u003c\/li\u003e\n\u003cli\u003eCell technology: Lithium iron nanophosphate (LiFePO4)\u003c\/li\u003e\n\u003cli\u003eCharging cutoff voltage: 14.6V\u003c\/li\u003e\n\u003cli\u003eMaximum discharge cutoff voltage: 10V\u003c\/li\u003e\n\u003cli\u003eTemperature operating range: -20°C to +60°C\u003c\/li\u003e\n\u003cli\u003eTemperature storage range: 0°C to +25°C\u003c\/li\u003e\n\u003cli\u003eCharging current from alternator: max. 760W\u003c\/li\u003e\n\u003cli\u003eCharging current external lithium charger: up to 12A (1C, ~60 min)\u003c\/li\u003e\n\u003cli\u003eConnection: Multi-Connect M6, top, side, front\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CS-Batteries","offers":[{"title":"Default Title","offer_id":44302611808523,"sku":"HDX-40-12AH-LIFEPO4","price":349.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9478\/5927\/files\/cs-batteries-hdx-40-12ah-lifepo4-lithium-lifepo4-masori-kaufen.webp?v=1747917842"}],"url":"https:\/\/masprori.com\/en\/collections\/cs-batteries-lithium-batteries-car.oembed","provider":"Masori | Shop","version":"1.0","type":"link"}